RAM5006E-016 Emerson Network Power, RAM5006E-016 Datasheet - Page 28

• Manufacturer Part Number: RAM5006E-016
• Manufacturer: Emerson Network Power

Specifications of RAM5006E-016

• Lead Free Status / RoHS Status: Compliant

Figure 1-5. PMCspan16E-010 Installation on a PMCspan16E-002
10
1 Hardware Preparation and Installation
MVME51005E Single Board Computer Installation and Use (6806800A38B)
Note
Warning
Caution
2. Perform an operating system shutdown. Turn the AC or DC power off and remove the
3. If the Primary PMC Carrier Module and MVME5100 assembly is already installed in the
1. Attach an ESD strap to your wrist. Attach the other end of the ESD strap to an electrical
PMCspan16E-002
Assembly
ground. Note that the system chassis may not be grounded if it is unplugged. The ESD
strap must be secured to your wrist and to ground throughout the procedure.
This procedure assumes that you have read the user’s manual that was furnished with
the PMCspan, and that you have installed the selected PMC modules on your
PMCspan according to the instructions provided in the PMCspan and PMC manuals.
MVME5100 and
AC cord or DC power lines from the system. Remove chassis or system cover(s) as
necessary for access to the VME module.
VME chassis, carefully remove it as shown in
P1 and P2 facing you.
Dangerous voltages, capable of causing death, are present in this equipment.
Use extreme caution when handling, testing, and adjusting.
Inserting or removing modules with power applied may result in damage to
module components. Avoid touching areas of integrated circuitry, static
discharge can damage these circuits.
Figure 1-2
and place it with connectors
P3
J3
PMCspan16E-010
2065 9708