BOXD865GLCL Intel, BOXD865GLCL Datasheet - Page 22

• Manufacturer Part Number: BOXD865GLCL
• Manufacturer: Intel

Specifications of BOXD865GLCL

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Intel Desktop Board D865GBF/D865GLC Technical Product Specification
1.7 System Memory
22
Note:
The Desktop Boards D865GBF and D865GLC have four DIMM sockets and support the following
memory features:
Table 5 lists the supported system bus frequency and memory speed combinations.
Table 5.
NOTES
To use this type of DIMM…
DDR400
DDR333 (Note)
DDR266
For information about
Obtaining DDR SDRAM specifications
Double-sided DIMMS with x16 organization are not supported.
2.5 V (only) 184-pin DDR SDRAM DIMMs with gold-plated contacts
Unbuffered, single-sided or double-sided DIMMs with the following restriction:
4 GB maximum total system memory. Refer to Section 2.2.1 on page 59 for information on
the total amount of addressable memory.
Minimum total system memory: 64 MB
Non-ECC DIMMs
Serial Presence Detect
DDR400, DDR333, and DDR266 SDRAM DIMMs
Remove the AGP video card before installing or upgrading memory to avoid interference with
the memory retention mechanism.
To be fully compliant with all applicable DDR SDRAM memory specifications, the board
should be populated with DIMMs that support the Serial Presence Detect (SPD) data
structure. This allows the BIOS to read the SPD data and program the chipset to accurately
configure memory settings for optimum performance. If non-SPD memory is installed, the
BIOS will attempt to correctly configure the memory settings, but performance and reliability
may be impacted or the DIMMs may not function under the determined frequency.
When using an 800 MHz system bus frequency processor, DDR333 memory is clocked at 320 MHz. This
minimizes system latencies to optimize system throughput.
Supported System Bus Frequency and Memory Speed Combinations
The processor's system bus frequency must be…
800 MHz
800 or 533 MHz
800, 533, or 400 MHz
Refer to
Section 1.5, page 18