MPC7410RX500LE Freescale Semiconductor, MPC7410RX500LE Datasheet - Page 52

• Manufacturer Part Number: MPC7410RX500LE
• Description: IC MPU 32BIT 500MHZ PPC 360-CBGA
• Manufacturer: Freescale Semiconductor

Specifications of MPC7410RX500LE

• Processor Type: MPC74xx PowerPC 32-Bit
• Speed: 500MHz
• Voltage: 1.8V
• Mounting Type: Surface Mount
• Package / Case: 360-FCCBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -

Document Revision History
52
Revision
0.3
0.2
0.1
0
Date
—
—
—
—
Added 3.3 V support on the processor bus (BVSEL).
Table 7—update typical and maximum power numbers for full-on mode in. Removed note 4.
Reworded notes 2 and 3.
Table 9, Note 2—removed reference to application note.
Figure 17—corrected side view datum A to be datum C.
Section 1.8.7—added CI and WT to transfer attribute signals requiring pull-ups.
Section 1.8.7—added 1-kΩ pull-up recommendation to GBL when GBL is not connected.
Table 2— added pull-down resistance necessary for internally pulled-up voltage select pins. Added
3.3-V support for BVSEL.
Table 13—added note 14 for BVSEL, L2VSEL, and TRST pins to address pull-down resistance
necessary for these internally pulled-up pins to recognize a low signal.
Table 6—lowered 2.5 V CV
support for 3.3-V processor bus.
Table 15—modified note 1, use L2CR[L2SL] for L2CLK frequency less than 150 MHz.
Table 8—revised note 2 discussing for 3.3-V bus voltage support.
Table 14—added note 5, do not use PL off during power-up sequence.
Table 1—update output hold times (t
Corrected Section 1.3—technology from 0.13 µm to 0.18 µm
Updated Table 7—adds power consumption numbers; adds note on estimated decrease w/o AltiVec.
Updated Table 8—adds minimum values for processor frequency and VCO frequency.
Updated Table 9—input setup, output valid times, output hold times, SYSCLK to output high
impedance.
Updated Table 11—L2SYNC_IN to high impedance.
Updated Figure 17—mechanical dimensions, adds capacitor pad dimensions.
Minor updates.
Initial release.
MPC7410 RISC Microprocessor Hardware Specifications, Rev. 6.1
Table 16. Document Revision History (continued)
IH
from 2.2 to 2.0 V to be compatible with V
L2CHOX
Substantive Change(s)
).
.
OH
of the MPC107. Added
Freescale Semiconductor