DS26521LN+ Maxim Integrated Products, DS26521LN+ Datasheet - Page 51

• Manufacturer Part Number: DS26521LN+
• Description: IC TXRX T1/E1/J1 64-LQFP
• Manufacturer: Maxim Integrated Products
• Type: Line Interface Units (LIUs)r

Specifications of DS26521LN+

• Number Of Drivers/receivers: 1/1
• Protocol: T1/E1/J1
• Voltage - Supply: 3.135 V ~ 3.465 V
• Mounting Type: Surface Mount
• Package / Case: 64-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

8.9.6.1 Additional E1 Receive Sa- and Si-Bit Receive Operation (E1 Mode)
The DS26521, when operated in the E1 mode, provides for access to both the Sa and the Si bits via two methods.
The first involves using the internal
an expanded version of the first method.
8.9.6.1.1 Internal Register Scheme Based on Double-Frame (Method 1)
On the receive side, the
bit locations. The E1RAFand
align frame bit in Receive Latched Status Register 2 (RLS2.0) indicates that the contents of the RAF and RNAF
have been updated. The host can use the RLS2.0 bit to know when to read the
host has 250μs to retrieve the data before it is lost.
8.9.6.1.2 Internal Register Scheme Based on CRC-4 Multiframe (Receive Side)
On the receive side there is a set of eight registers (E1RSiAF, E1RSiNAF, E1RRA, E1RSa4:E1RSa8) that report
the Si and Sa bits as they are received. These registers are updated with the setting of the receive CRC-4
multiframe bit in Receive Latched Status Register 2 (RLS2.1). The host can use the RLS2.1 bit to know when to
read these registers. The user has 2ms to retrieve the data before it is lost. See the register descriptions for
additional information.
8.9.6.1.3 Internal Register Scheme Based on CRC-4 Multiframe (Transmit Side)
On the transmit side there is a set of eight registers (E1TSiAF, E1TSiNAF, E1TRA, E1TSa4:E1TSa8) that, via the
Transmit Sa-Bit Control register (E1TSACR), can be programmed to insert both Si and Sa data. Data is sampled
from these registers with the setting of the transmit multiframe bit in Transmit Latched Status Register 1 (TLS1.3).
The host can use the TLS1.3 bit to know when to update these registers. It has 2ms to update the data or else the
old data will be retransmitted. See the register descriptions for additional information.
8.9.6.2 Sa-Bit Monitoring and Reporting
In addition to the registers outlined above, the DS26521 provides status and interrupt capability in order to detect
changes in the state of selected Sa bits. The
monitored for a change of state. When a change of state is detected in one of the enabled Sa-bit positions, a status
bit is set in the
by unmasking RIM7.0 (SaXCD). If multiple Sa bits have been enabled, the user can read the
address 06Eh to determine the current value of each Sa bit.
For the Sa6 bits, additional support is available to detect specific codewords per ETS 300 233. The Sa6CODE
register reports the received Sa6 codeword. The codeword must be stable for a period of three submultiframes and
be different from the previous stored value in order to be updated in this register. See the
description for further details on the operation of this register and the values reported in it. An additional status bit is
provided in
status bit in
8.9.7 Maintenance and Alarms
The DS26521 provides extensive functions for alarm detection and generation. It also provides diagnostic functions
for monitoring of performance and sending of diagnostic information such as the following:
•
•
•
•
•
•
•
•
Real-time and latched status bits, interrupts, and interrupt mask for transmitter and receiver
LOS detection
RIA detection and generation
PDV violation detection
Error counters
DS0 monitoring
Milliwatt generation and detection
Slip buffer status for transmit and receive
R LS7
2 9
RIM7
R LS7
9
to allow for interrupt generation when enabled.
(Sa6CD) to indicate if the received Sa6 codeword has changed. A mask bit is provided for this
register via the SaXCD bit (bit 0). This status bit can, in turn, be used to generate an interrupt
E1RAF
E1RNAF
and
E1RAF/E1RNAF
E1RNAF
registers are updated on align frame boundaries. The setting of the receive
registers will always report the data as it received in the Sa- and Si-
E 1RSAIMR
2
51 of 258
and
E1TAF/E1TNAF
register can be used to select which Sa bits are
registers. The second method involves
DS26521 Single T1/E1/J1 Transceiver
E1RAF
and
E1RNAF
S a6CODE
9
SaBITS
registers. The
register at
register