Si5369-EVB Silicon Laboratories Inc, Si5369-EVB Datasheet - Page 3

• Manufacturer Part Number: Si5369-EVB
• Description: MCU, MPU & DSP Development Tools SI5369 DEV KIT
• Manufacturer: Silicon Laboratories Inc

Specifications of Si5369-EVB

• Processor To Be Evaluated: Si5369
• Interface Type: I2C, SPI
• Operating Supply Voltage: 3.3 V
• Lead Free Status / Rohs Status: Details

3. Features
The Si5365/66-EVB, Si5367/68-EVB, and Si5369-EVBs each include the following:




4. Si5365/66-EVB, Si5367/68-EVB, and Si5369-EVB Quick Start
1. Install the Precision Clock EVB Driver. (This must be installed before the EVB is connected to the PC via the
2. Install the Precision Clock EVB Software. (Assumes that Microsoft .NET Framework 3.1 is already installed.)
3. Connect the two power supplies to the EVB. One is 3.3 V and the other is either 1.8, 2.5, or 3.3 V. The DUT is
4. Turn on the power supplies.
5. Connect a USB cable from the EVB to the PC where the software was installed.
6. Install USB driver.
7. Launch software by clicking on Start
CD with documentation and EVB software including the DSPLLsim configuration software utility
USB cable
EVB circuit board including a Si5366 (Si5365/66-EVB), a Si5368 (Si5367/68-EVB), or a Si5369 (Si5369-EVB)
User's Guide (this document)
USB cable.) For details, see Section "7.EVB Software Installation" on page 12.
powered by the 1.8/2.5/3.3 V supply.
and selecting one of the programs.

Programs

Rev. 0.5
Silicon Laboratories

Precision Clock EVB Software
S i 5 3 6 5 / 6 6 - E V B
S i 5 3 6 7 / 6 8 - E V B
S i 5 3 6 9 - E V B
3