FLUKE-190-104/AM Fluke Electronics, FLUKE-190-104/AM Datasheet - Page 104

• Manufacturer Part Number: FLUKE-190-104/AM
• Description: SCOPEMETER 4CH 100MHZ COLOR AMER
• Manufacturer: Fluke Electronics
• Series: ScopeMeter® 190r
• Type: Handheldr

Specifications of FLUKE-190-104/AM

• Bandwidth: 100MHz
• Channels: 4
• Display Type: LCD - Color
• Features: DMM, USB Interface, Save, Recall, Record, Trend
• Probe Type: 10:1 Voltage Probe (1 Blue, 1 Green, 1 Red, 1 Gray)
• Sampling Rate (per Second): 1.25GS/s
• Input Impedance: 1M
• Rise Time (typ): 3.5nS
• Voltage - Input (max): CAT III 1000V, CAT IV 600V
• Voltage - Supply: 7.2V Battery, 17.8VDC Adapter
• Includes: Alligator Clips, Battery Charger/Adapter, Case, Hook Clips, Probe Set, Software, Test Leads, USB Cable
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 614-1176

Fluke 190 Series II
Users Manual
Charging the Batteries
At delivery, the Li-ion batteries may be empty and must be
charged for 5 hours (with the test tool turned off) to reach full
charge.
When battery power is used, the battery indicator at the
top of the screen informs you about the condition of the
batteries. The battery symbols are:
symbol
of operating time left. See also Displaying Battery
Information on page 101.
To charge the batteries and power the instrument, connect
the power adapter as shown in Figure 47. To charge the
batteries more quickly, turn off the test tool.
96
To avoid overheating of the batteries during
charging, do not exceed the allowable
ambient temperature given in the
specifications.
No damage will occur if the power adapter is
connected for long periods, e.g., during the
weekend. The instrument then automatically
switches to trickle charging.
indicates that there are typically five minutes
Caution
Note
. The
Alternatively, you may choose to exchange the battery
(Fluke accessory BP290 or BP291) with a fully charged
one, and use the external battery charger EBC290
(optional Fluke accessory).
Figure 47. Charging the Batteries