P80C592FFA/00,518 NXP Semiconductors, P80C592FFA/00,518 Datasheet - Page 58

• Manufacturer Part Number: P80C592FFA/00,518
• Description: IC 80C51 MCU 8BIT ROMLESS 68PLCC
• Manufacturer: NXP Semiconductors
• Series: 80Cr

Specifications of P80C592FFA/00,518

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: CAN, EBI/EMI, UART/USART
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 48
• Program Memory Size: -
• Program Memory Type: ROMless
• Eeprom Size: -
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 68-LCC (J-Lead)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Philips Semiconductors
13.6.5
The Overload Frame consists of two fields:
The transmission of an Overload Frame may only start:
The P8xC592's on-chip CAN-controller will never initiate
transmission of a condition 1 Overload Frame and will only
react on a transmitted condition 2 Overload Frame,
according to the CAN-protocol. No more than two
Overload Frames are generated to delay a Data Frame or
a Remote Frame. Although the overall form of the
Overload Frame corresponds to that of the Error Frame,
an Overload Frame does not initiate or require the
retransmission of the preceding frame.
1996 Jun 27
handbook, full pagewidth
The Overload Flag
The Overload Delimiter.
Condition 1; during the first bit period of an expected
Intermission Field.
Condition 2; one bit period after detecting the dominant
bit during Intermission Field.
8-bit microcontroller with on-chip CAN
O
VERLOAD
DATA FRAME
F
RAME
1 ERROR
superimposing of
FLAG
ERROR FLAGs
Fig.20 Error Frame.
ERROR FRAME
58
13.6.5.1
The Overload Flag consists of six dominant bits and has a
similar format to the Error Flag.
There are two conditions in the CAN-protocol which lead
to the transmission of an Overload Flag:
The Overload Flag's form corrupts the fixed form of the
Intermission Field. All other CAN-controllers detecting the
overload condition also transmit an Overload Flag
(condition 2).
Condition 1; receiver circuitry requires more time to
process the current data before receiving the next frame
(receiver not ready).
Condition 2; detection of a dominant bit during
Intermission Field (see Section 13.6.6).
ERROR DELIMITER
Overload Flag
MGA165
INTER-FRAME SPACE
or OVERLOAD FRAME
Product specification
P8xC592