SAM9261 Atmel Corporation, SAM9261 Datasheet - Page 691

• Manufacturer Part Number: SAM9261
• Manufacturer: Atmel Corporation

Specifications of SAM9261

• Flash (kbytes): 0 Kbytes
• Pin Count: 217
• Max. Operating Frequency: 240 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 96
• Ext Interrupts: 96
• Usb Transceiver: 3
• Usb Speed: Full Speed
• Usb Interface: Host, Device
• Spi: 2
• Twi (i2c): 1
• Uart: 4
• Ssc: 3
• Sd / Emmc: 1
• Graphic Lcd: Yes
• Video Decoder: No
• Camera Interface: No
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 160
• Self Program Memory: NO
• External Bus Interface: 1
• Dram Memory: sdram
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 1.08 to 1.32
• Fpu: No
• Mpu / Mmu: No/Yes
• Timers: 3
• Output Compare Channels: 3
• Input Capture Channels: 3
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

40.2
6062N–ATARM–3-Oct-11
Soldering Profile
Table 40-5
Table 40-5.
Note:
A maximum of three reflow passes is allowed per component.
Profile Feature
Average Ramp-up Rate (217°C to Peak)
Preheat Temperature 175°C ±25°C
Temperature Maintained Above 217°C
Time within 5° C of Actual Peak Temperature
Peak Temperature Range
Ramp-down Rate
Time 25° C to Peak Temperature
It is recommended to apply a soldering temperature higher than 250°C.
gives the recommended soldering profile from J-STD-20.
Soldering Profile
Green Package
3° C/sec. max.
180 sec. max.
60 sec. to 150 sec.
20 sec. to 40 sec.
260 +0 ° C
6° C/sec. max.
8 min. max.
AT91SAM9261
691