MT9074 Mitel Networks Corporation, MT9074 Datasheet - Page 41
![no-image](/images/no-image-200.jpg)
MT9074
Manufacturer Part Number
MT9074
Description
T1/E1/J1 Single Chip Transceiver
Manufacturer
Mitel Networks Corporation
Datasheet
1.MT9074.pdf
(122 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
MT9074AL
Manufacturer:
ZARLINK
Quantity:
1 238
Company:
Part Number:
MT9074AL1
Manufacturer:
ZARLINK
Quantity:
22
Company:
Part Number:
MT9074AP
Manufacturer:
MITEL
Quantity:
14
Part Number:
MT9074AP
Manufacturer:
ZARLINK
Quantity:
20 000
Company:
Part Number:
MT9074AP1
Manufacturer:
ZARLINK
Quantity:
227
Company:
Part Number:
MT9074APR1
Manufacturer:
ZARLINK
Quantity:
227
Advance Information
Digital Framer Mode
T1 mode
Setting bit 4 in the Configuration Control Word
(address 10H of Master Control Page 2) disables the
LIU and converts the MT9074 into a digital T1
transceiver.
backplane maps into transmit and receive digital
1.544 Mb/s streams. The 1.544 Mb/s transmit
streams may be formatted for single phase NRZ (by
setting bit 7 of the LIU Control Word - Master Page 1
high) or two phase NRZ. The data rate conversion
(between 2.048 Mb/s and 1.544 Mb/s) is done within
the MT9074. The transmit 1.544 MHz clock is
internally generated from a PLL that locks onto the
input C4b clock. This clock is then output on pin
E1.5o (PLCC pin 44 - QFP pin 32). The digital 1.544
Mb/s transmit data is output on pins TXA and TXB
(PLCC pins 37,38 - QFP pins 18,19) with the rising
edge of C1.5o. Receive digital data is clocked in on
pins RRING and RTIP. This data is clocked in with
the rising edge of the input 1.544 Mhz clock S/FR/
E1.5i (PLCC pin 66, QFP pin 63). Coding is optional
under software control.
E1 mode
Setting bit 4 in the Configuration Control Word
(address 10H of Master Control Page 2) disables the
LIU and converts the MT9074 into a digital E1
transceiver.
backplane maps into transmit and receive digital
2.048 Mb/s streams. The 2.048 Mb/s transmit data
streams may be formatted for single phase NRZ (by
setting bit 7 of the LIU Control Word - Master Page 1
high) or two phase NRZ. The transmit 2.048 MHz
clock is derived from the input C4b clock. This clock
is then output on pin E1.5o (PLCC pin 44 - QFP pin
32). The digital 2.048 Mb/s transmit data is output on
pins TXA and TXB (PLCC pins 37,38 - QFP pins
18,19) with the rising edge of E1.5o. Receive digital
data is clocked in on pins RRING and RTIP. This
data is clocked in with the rising edge of the input
2.048 Mhz clock MS/FR/E1.5i (PLCC pin 66, QFP
pin 63). Coding is optional under software control.
The
The
digital
digital
2.048
2.048
Mb/s
Mb/s
ST-BUS
ST-BUS
MT9074
41