s908ab32ag0cfue Freescale Semiconductor, Inc, s908ab32ag0cfue Datasheet - Page 232

no-image

s908ab32ag0cfue

Manufacturer Part Number
s908ab32ag0cfue
Description
M68hc08 Microcontrollers
Manufacturer
Freescale Semiconductor, Inc
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
s908ab32ag0cfueR
Manufacturer:
FREESCALE
Quantity:
20 000
Analog-to-Digital Converter (ADC)
14.4.1 ADC Port I/O Pins
14.4.2 Voltage Conversion
14.4.3 Conversion Time
14.4.4 Conversion
Technical Data
232
PTB7/ATD7–PTB0/ATD0 are general-purpose I/O (input/output) pins
that share with the ADC channels. The channel select bits define which
ADC channel/port pin will be used as the input signal. The ADC
overrides the port I/O logic by forcing that pin as input to the ADC. The
remaining ADC channels/port pins are controlled by the port I/O logic
and can be used as general-purpose I/O. Writes to the port register or
DDR will not have any affect on the port pin that is selected by the ADC.
Read of a port pin in use by the ADC will return a logic 0.
When the input voltage to the ADC equals V
signal to $FF (full scale). If the input voltage equals V
converts it to $00. Input voltages between V
straight-line linear conversion.
Conversion starts after a write to the ADSCR. One conversion will take
between 16 and 17 ADC clock cycles. The ADIVx and ADICLK bits
should be set to provide a 1-MHz ADC clock frequency.
In continuous conversion mode, the ADC data register will be filled with
new data after each conversion. Data from the previous conversion will
be overwritten whether that data has been read or not. Conversions will
continue until the ADCO bit is cleared. The COCO bit is set after the first
conversion and will stay set until the next write of the ADC status and
control register or the next read of the ADC data register.
In single conversion mode, conversion begins with a write to the
ADSCR. Only one conversion occurs between writes to the ADSCR.
Number of bus cycles = conversion time × bus frequency
Analog-to-Digital Converter (ADC)
Conversion time =
16 to 17 ADC cycles
ADC frequency
REFH
REFH
MC68HC908AB32
, the ADC converts the
and V
Freescale Semiconductor
REFL ,
REFL
the ADC
are a
Rev. 1.1

Related parts for s908ab32ag0cfue