m30262f8gp Renesas Electronics Corporation., m30262f8gp Datasheet - Page 217

no-image

m30262f8gp

Manufacturer Part Number
m30262f8gp
Description
Renesas 16-bit Cmos Single-chip Microcomputer M16c Family / M16c/20 Series
Manufacturer
Renesas Electronics Corporation.
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
M30262F8GP
Manufacturer:
NA
Quantity:
20 000
Part Number:
m30262f8gp#D3
Manufacturer:
Renesas Electronics America
Quantity:
10 000
Part Number:
m30262f8gp#D5
Manufacturer:
Renesas Electronics America
Quantity:
10 000
Part Number:
m30262f8gp#U3
Manufacturer:
Renesas Electronics America
Quantity:
10 000
Part Number:
m30262f8gp#U5
Manufacturer:
Renesas Electronics America
Quantity:
10 000
Part Number:
m30262f8gp#U7
Manufacturer:
Renesas Electronics America
Quantity:
10 000
Appendix Standard Serial I/O Mode 1 (Flash Memory Version)
Figure 1.22.6. Timing for block erasing
Block Erase Command
Erase All Code Blocks Command
(M16C reception data)
(M16C transmit data)
This command erases the data in the specified block. Execute the block erase command as explained
here following.
When block erasing ends, the RTS
erase ends, the result of the block erase operation can be known by reading the status register. For
more information, see the section on the status register.
Each block can be erase-protected with the lock bit. For more information, see the section on the data
protection function.
This command erases the content of all code blocks. Execute the erase all code blocks command as
explained here following.
When block erasing ends, the RTS1 (BUSY) signal changes from the “H” to the “L” level. The result of
the erase operation can be known by reading the status register.
(1) Transfer the “20
(2) Transfer addresses A
(3) Transfer the verifycommand code “D0
(1) Transfer the “A716” command code with the 1st byte.
(2) Transfer the verify command code “D016” with the 2nd byte. With the verify command code, the
erase operation will start for the specified block in the flash memory. Write the highest address of
the specified block for addresses A
erase operation will start and continue for all code blocks in the flash memory.
Preliminary Specifications Rev. 0.9
RTS1(BUSY)
Specifications in this manual are tentative and subject to change.
CLK1
RxD1
TxD1
16
” command code with the 1st byte.
8
to A
20
Renesas Technology Corp.
15
16
1
and A
(BUSY) signal changes from the “H” to the “L” level. After block
A
A
8
8
15
16
to A
to
16
to A
” with the 4th byte. With the verify command code, the
23
.
A
23
A
16
23
with the 2nd and 3rd bytes respectively.
to
D0
16
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M16C/26 Group
211

Related parts for m30262f8gp