m30262f8gp Renesas Electronics Corporation., m30262f8gp Datasheet - Page 221

• Manufacturer Part Number: m30262f8gp
• Description: Renesas 16-bit Cmos Single-chip Microcomputer M16c Family / M16c/20 Series
• Manufacturer: Renesas Electronics Corporation.

Appendix Standard Serial I/O Mode 1 (Flash Memory Version)
Figure 1.22.12. Timing for the read check data
Read Check Data
This command reads the check data that confirms that the write data, which was sent with the page
program command, was successfully received.
To use this read check data command, first execute the command and then initialize the check data.
Next, execute the page program command the required number of times. After that, when the read
check command is executed again, the check data for all of the read data that was sent with the page
program command during this time is read. The check data is the result of CRC operation of write data.
(1) Transfer the "FD
(2) The check data (low) is received with the 2nd byte and the check data (high) with the 3rd.
Preliminary Specifications Rev. 0.9
Specifications in this manual are tentative and subject to change.
(M16C reception data)
(M16C transmit data)
RTS1(BUSY)
16
" command code with the 1st byte.
CLK1
RxD1
TxD1
Renesas Technology Corp.
Check data (low)
FD
16
Check data (high)
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M16C/26 Group
215