M306V0ME-107FP MITSUBISHI [Mitsubishi Electric Semiconductor], M306V0ME-107FP Datasheet - Page 124

• Manufacturer Part Number: M306V0ME-107FP
• Description: SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
• Manufacturer: MITSUBISHI [Mitsubishi Electric Semiconductor]

124
2.11.4 Clock-asynchronous serial I/O mode (compliant with the SIM interface)
Table 2.11.8 Specifications of clock-asynchronous serial I/O mode (compliant with the SIM
The SIM interface is used for connecting the microcomputer with a memory card I/C or the like; adding
some extra settings in UART2 clock-asynchronous serial I/O mode allows the user to effect this function.
Tables 2.11.8 and 2.11.9 show the specifications of clock-asynchronous serial I/O mode (compliant with
the SIM interface).
Transfer data format
Transfer clock
Transmission / reception control
Other settings
Transmission start condition • To start transmission, the following requirements must be met:
Reception start condition
Interrupt request
generation timing
Item
interface) (1)
• With the internal clock chosen (bit 3 of address 0378
• Transfer data 8-bit UART mode (bit 2 through bit 0 of address 0378
• One stop bit (bit 4 of address 0378
• With the direct format chosen
• With the inverse format chosen
• With an external clock chosen (bit 3 of address 0378
• Disable the CTS and RTS function (bit 4 of address 037C
• The sleep mode select function is not available for UART2
• Set transmission interrupt factor to “transmission completed” (bit 4 of address 037D
• To start reception, the following requirements must be met:
• When transmitting
• When receiving
Set parity to “even” (bit 5 and bit 6 of address 0378
Set data logic to “direct” (bit 6 of address 037D
Set transfer format to LSB (bit 7 of address 037C
Set parity to “odd” (bit 5 and bit 6 of address 0378
Set data logic to “inverse” (bit 6 of address 037D
Set transfer format to MSB (bit 7 of address 037C
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER
- Transmit enable bit (bit 0 of address 037D
- Transmit buffer empty flag (bit 1 of address 037D
- Reception enable bit (bit 2 of address 037D
- Detection of a start bit
When data transmission from the UART2 transfer register is completed
(bit 4 of address 037D
When data transfer from the UART2 receive register to the UART2 receive
buffer register is completed
_______
_______
16
= “1”)
Specification
16
= “0”)
and ON-SCREEN DISPLAY CONTROLLER
16
16
16
) = “1”
16
16
= “0”) : fi / 16 (n + 1) (Note 1) : fi=f
) = “1”
16
MITSUBISHI MICROCOMPUTERS
= “0”).
16
= “1”) : f
16
16
16
= “1”)
= “0”).
= “1”)
16
= “0” and “1” respectively)
= “1” and “1” respectively)
M306V0ME-XXXFP
) = “0”
EXT
16
/ 16 (n+1) (Note 1) (Note 2)
= “1”)
M306V0EEFP
16
= “101
2
16
”)
1
, f
= “1”)
8
, f
Rev. 1.0
32