S71PL032J SPANSION [SPANSION], S71PL032J Datasheet - Page 81

• Manufacturer Part Number: S71PL032J
• Description: STACKED MULTI CHIP PRODUCT FLASH MEMORY AND RAM
• Manufacturer: SPANSION [SPANSION]

Absolute Maximum Ratings
August 12, 2004 S29PL127J_064J_032J_MCP_00_A3
+0.8 V
–0.5 V
–2.0 V
Maximum Negative Overshoot Waveform
Storage Temperature Plastic Packages . . . . . . . . . . . . . . . . –65°C to +150°C
Ambient Temperature with Power Applied . . . . . . . . . . . . . . –65°C to +125°C
Voltage with Respect to Ground
V
RESET# (Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to +13.0 V
WP#/ACC (Note 2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to +10.5 V
All other pins (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . .–0.5 V to V
Output Short Circuit Current (Note 3). . . . . . . . . . . . . . . . . . . . . . . . 200 mA
Notes:
1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions,
2. Minimum DC input voltage on pins A9, OE#, RESET#, and WP#/ACC is –0.5 V.
3. No more than one output may be shorted to ground at a time. Duration of the
4. Stresses above those listed under “Absolute Maximum Ratings” may cause perma-
CC
20 ns
input or I/O pins may overshoot V
DC voltage on input or I/O pins is V
I/O pins may overshoot to V
During voltage transitions, A9, OE#, WP#/ACC, and RESET# may overshoot V
to –2.0 V for periods of up to 20 ns. See
pin A9, OE#, and RESET# is +12.5 V which may overshoot to +14.0 V for periods
up to 20 ns. Maximum DC input voltage on WP#/ACC is +9.5 V which may
overshoot to +12.0 V for periods up to 20 ns.
short circuit should not be greater than one second.
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational
sections of this data sheet is not implied. Exposure of the device to absolute max-
imum rating conditions for extended periods may affect device reliability.
(Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–0.5 V to +4.0 V
A d v a n c e
20 ns
Figure 8. Maximum Overshoot Waveforms
20 ns
S29PL127J/S29PL064J/S29PL032J for MCP
I n f o r m a t i o n
CC
+2.0 V for periods up to 20 ns. See
SS
CC
to –2.0 V for periods of up to 20 ns. Maximum
+0.5 V. During voltage transitions, input or
Figure
+2.0 V
+0.5 V
2.0 V
V
V
CC
CC
8. Maximum DC input voltage on
Maximum Positive Overshoot Waveform
20 ns
Figure
CC
20 ns
+0.5 V
8.
SS
20 ns
81