20-101-0303 Rabbit Semiconductor, 20-101-0303 Datasheet - Page 39

• Manufacturer Part Number: 20-101-0303
• Description: SMARTSCREEN OP7100 W/TOUCHSCREEN
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0303

• Display Type: STN - Super-Twisted Nematic
• Viewing Area: 121.00mm L x 91.00mm W
• Backlight: CCFL - White
• Dot Pitch: 0.36mm x 0.36mm
• Dot Pixels: 320 x 240 (QVGA)
• Interface: Serial
• Product: Prototyping Accessories
• Processor Type: Z180
• Sram: 128 KB
• Flash: 512 KB
• Number Of I/os: 16
• Backup Battery: 3 V Lithium Coin Type
• Operating Voltage: 10 V to 30 V
• Power Consumption: 4.5 W
• Interface Type: Ethernet
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Display Mode: -
• Dot Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 20-101-0303; 20-101-303; 20-101-303; 316-1175

A program sends data by writing characters into the transmit buffer. If the
serial port is not already transmitting, the write functions will automatically
initiate transmission. Once the last character of the buffer is sent, the
transmit interrupt is turned off. A high-level application can write data one
character at a time or in a string.
CTS/RTS Control
The Z180’s hardware constrains its Port 0 to have the CTS (clear to send)
pulled low by the RS-232 device to which it is talking. The OP7100 does
not support CTS for the Z180’s Port 1.
Modem Communication
Modems and telephone lines facilitate RS-232 communication across great
distances.
The Dynamic C RS-232 library supports communication with a Hayes Smart
Modem or compatible. The CTS, RTS and DTR lines of the modem are not
used. If the modem used is not truly Hayes Smart Modem compatible, tie the
CTS, RTS and DTR lines on the mo-
dem side together. The CTS and RTS
lines on the controller also have to
be tied together. A “NULL-modem”
cable is also required for the TX and
RX lines. A commercial NULL-mo-
dem cable would have its CTS and
RTS lines tied together already on
both sides.
Figure 3-18 shows the wiring for
connections between a modem and
the OP7100.
OP7100
Figure 3-18. Connections Between
Modem
GND
DTR
Side
RTS
CTS
Controller and Modem
RX
TX
Hardware 39
OP7100
Side
RX
TX
GND
RTS
CTS