EQ-SFM-MAX-V1.3 Equinox Technologies, EQ-SFM-MAX-V1.3 Datasheet - Page 76

• Manufacturer Part Number: EQ-SFM-MAX-V1.3
• Description: MODULE FOR PPM3-MK2 I/O DRIVER
• Manufacturer: Equinox Technologies

Specifications of EQ-SFM-MAX-V1.3

• Accessory Type: I/O Driver Module
• For Use With/related Products: PPM3-MK2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 483-1013

4.7.2 Instructions
The instructions below detail how to set up the programmer to supply a controlled voltage to the
Target System.
1. Create a Programming Project which powers the Target System
PPM3 MKII Programmer - User Guide - V1.04 - 10
•
•
•
•
•
•
This enables the programmer to supply power to the Target System.
In EQTools – Project Builder – Select the <Target Power Supply Settings> tab
Set the required ‘Target Voltage’ and ‘Tolerance’ eg. 3.3V +/- 500mV.
The Voltage ‘Stabilise Time’ should be set to a long enough time to allow the voltage to reach
its final voltage (default: 200ms).
Under the ‘Programmer Controlled Power Supply’ section,
select: <Programmer controlled Target Power Supply: ON>
Enter the maximum current which your Target System could take from the programmer supply
(worst case i.e. current inrush condition)
Leave all other settings as the default values
th
May 2008
65