MCP1631RD-MCC2 Microchip Technology, MCP1631RD-MCC2 Datasheet - Page 42

• Manufacturer Part Number: MCP1631RD-MCC2
• Description: REFERENCE DESIGN MCP1631HV
• Manufacturer: Microchip Technology

Specifications of MCP1631RD-MCC2

• Main Purpose: Power Management, Battery Charger
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: MCP1631HV, PIC16F883
• Primary Attributes: 1 ~ 2 Cell- Li-Ion, 1 ~ 5 Cell- NiCd/NiMH, 1 ~ 2 1W LEDs
• Secondary Attributes: Status LEDs
• Silicon Manufacturer: Microchip
• Application Sub Type: Battery Charger
• Kit Application Type: Power Management - Battery
• Silicon Core Number: MCP1631HV, PIC16F883
• Kit Contents: Board
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC16F882/883/884/886/887
3.2
RA0 also has an Ultra Low-Power Wake-up option. The
next three sections describe these functions.
3.2.1
The ANSEL register (Register 3-3) is used to configure
the Input mode of an I/O pin to analog. Setting the
appropriate ANSEL bit high will cause all digital reads
on the pin to be read as ‘0’ and allow analog functions
on the pin to operate correctly.
The state of the ANSEL bits has no affect on digital out-
put functions. A pin with TRIS clear and ANSEL set will
still operate as a digital output, but the Input mode will
be analog. This can cause unexpected behavior when
executing
affected port.
REGISTER 3-3:
DS41291F-page 40
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-0
Note 1:
ANS7
R/W-1
2:
Additional Pin Functions
(2)
Setting a pin to an analog input automatically disables the digital input circuitry, weak pull-ups, and
interrupt-on-change if available. The corresponding TRIS bit must be set to Input mode in order to allow
external control of the voltage on the pin.
Not implemented on PIC16F883/886.
ANSEL REGISTER
read-modify-write
ANS<7:0>: Analog Select bits
Analog select between analog or digital function on pins AN<7:0>, respectively.
1 = Analog input. Pin is assigned as analog input
0 = Digital I/O. Pin is assigned to port or special function.
ANS6
R/W-1
ANSEL: ANALOG SELECT REGISTER
(2)
W = Writable bit
‘1’ = Bit is set
instructions
ANS5
R/W-1
(2)
on
R/W-1
ANS4
the
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-1
ANS3
(1)
.
R/W-1
ANS2
© 2009 Microchip Technology Inc.
x = Bit is unknown
R/W-1
ANS1
R/W-1
ANS0
bit 0