DM300018 Microchip Technology, DM300018 Datasheet - Page 47

• Manufacturer Part Number: DM300018
• Description: BOARD DEMO DSPICDEM 2
• Manufacturer: Microchip Technology
• Type: MCUr

Specifications of DM300018

• Contents: *
• Processor To Be Evaluated: dsPIC30F
• Interface Type: RS-232
• Silicon Manufacturer: Microchip
• Core Architecture: DsPIC
• Core Sub-architecture: DsPIC30
• Silicon Core Number: DsPIC30F
• Silicon Family Name: DsPIC30F2xxx, DsPIC30F3xxx
• Lead Free Status / RoHS Status: Not applicable / RoHS Compliant
• For Use With/related Products: dsPIC30F
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: Q2448034

6.4
© 2005 Microchip Technology Inc.
DEVICE PROGRAMMING
Load the sample application program for the dsPIC30F3010 using this process:
1. Plug the RJ11 (telephone) cable from the MPLAB ICD 2 into the ICD header (J1).
2. Start MPLAB IDE.
3. Open the dsPIC30F3010 sample project ( File>Open Workspace ) from
4. Build the sample project in MPLAB IDE ( Project>Build All) .
5. On the dsPICDEM™ 2 board set all positions on switch S4 to off. Then set switch
6. Download the sample application ( Programmer>Program ). The Output window
FIGURE 6-2:
7. Disconnect the MPLAB ICD 2 cable from the ICD header. The program is now
Note:
Make sure the USB cable from the MPLAB ICD 2 is connected to your PC.
path/dsPICDEM 2 Development Kit/Example Soft-
ware/30F3010/Demo.mcw.
S2 to M ALL. The MPLAB ICD 2 is now connected to the PGC and PGD pins on
the dsPIC30F3010.
(Figure 6-2) displays the status as the download occurs and indicates when the
programming has succeeded.
ready to run (see Section 6.5 “Observing the Sample Application”).
For detailed information and procedures on using the MPLAB IDE and ICD
2, refer to Chapter 2 “Getting Started”.
PROGRAMMING THE dsPIC30F3010 DEVICE
Using the dsPIC30F3010
DS51558A-page 41