P0528 Terasic Technologies Inc, P0528 Datasheet - Page 20

• Manufacturer Part Number: P0528
• Description: BOARD DEV DE1 ALTERA
• Manufacturer: Terasic Technologies Inc
• Type: FPGAr

Specifications of P0528

• Contents: DE1 Board, Power Supply, USB Cable, Plastic cover and software
• For Use With/related Products: Cyclone II 2C20
• For Use With: P0033 - BOARD ADAPTER HSMC TO GPIOP0006 - BOARD ADAPTER THDB-SUMP0001 - MODULE DIGITAL CAMERA 5MP (D5M)P0307 - KIT DEV 4.3" LCD TOUCH PANEL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: DE1

3.6 TOOLS – Multi-Port SRAM/SDRAM/Flash Controller
The TOOLS page of the Control Panel GUI allows selection of the User Ports. We will illustrate a
typical process by implementing a Flash Music Player. The music data is loaded into the Flash
memory. User Port 1 in the Flash Controller is used to send the music data to the Audio DAC
Controller and hence to the audio output jack.
You can implement this application as follows:
1. Erase the Flash memory (as explained in Section 3.4). Then, write a music file into the
2. In the DE1 Control Panel, select the TOOLS tab to reach the window in Figure 3.8.
3. Select the Asynchronous 1 port for the Flash Multiplexer and then click on the Configure
4. Set toggle switches SW1 and SW0 to OFF (DOWN position) and ON (UP position),
5. Plug your headset or a speaker into the audio output jack and you should hear the music
Flash memory. You can use the file music.wav in the directory DE1_demonstrations\music
on the DE1 System CD-ROM.
button to activate the port. You need to click the Configure button to enable the connection
from the Flash Memory to the Asynchronous Port 1 of the Flash Controller (indicated in
Figure 3.7).
respectively.
Figure 3.8. TOOLS window of the DE1 Control Panel.
18
DE1 User Manual