ST62E2XC-EPB/110 STMicroelectronics, ST62E2XC-EPB/110 Datasheet - Page 10

• Manufacturer Part Number: ST62E2XC-EPB/110
• Description: BOARD PROGRAMMING FOR ST625X/6X
• Manufacturer: STMicroelectronics
• Type: MCUr

Specifications of ST62E2XC-EPB/110

• Contents: Programmer Board
• For Use With/related Products: ST7265x
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

EPB - Remote Mode
4 REMOTE MODE
4.1 PC CONNECTION
In remote mode the EPROM programmer is connected to a PC through the appropriate inter-
face, serial or parallel, depending on the EPROM programmer type. The programming
process is menu-driven.
4.2 HARDWARE INSTALLATION
4.2.1 EPROM Programmer Board with Serial Interface
Proceed as follows:
1 Power off the PC computer and the EPROM programmer,
2 Configure the board in remote mode by placing a jumper at the REMOTE position in the W1
Note: EPBs are shipped with the REMOTE jumper on.
3 Connect the serial interface PC port COM1 or COM2 to the J3 board connector using the
4 Power on the PC and the EPROM programmer board,
5 The REMOTE LED (LD1) and the BUSY LED (LD2) light up.
10/39
ROM
RAM
UNLOCK
LOCK
OTP
EPROM
DEVICE
TYPE
REMOTE
LOCAL
jumper bank, depending on the type of EPB:
serial interface cable,
W1
7
This jumper off
This jumper on
ST62EXX EPB
RAM
LOCK
OTP
EEPROM
ST636X
ST637X
ST638X
ST63E1XX
RESERVED
REMOTE
W1
ST63E1XX EPB
This jumper on