ST62E2XC-EPB/110 STMicroelectronics, ST62E2XC-EPB/110 Datasheet - Page 8

• Manufacturer Part Number: ST62E2XC-EPB/110
• Description: BOARD PROGRAMMING FOR ST625X/6X
• Manufacturer: STMicroelectronics
• Type: MCUr

Specifications of ST62E2XC-EPB/110

• Contents: Programmer Board
• For Use With/related Products: ST7265x
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

EPB - Antistatic Requirements
2 ANTISTATIC REQUIREMENTS
2.1 TESTERS AND TOOLS
Any tester, equipment, or tool used at any production step or for any manipulation of semi-
conductor devices must have its shield connected to GROUND.
2.2 ANTISTATIC EQUIPMENT
An antistatic equipment should comprise:
– A conductive table top, made of steel or clean aluminium or covered by an antistatic surface
– An antistatic floor covering grounded through a conductive ground cable (with serial resistor
2.3 MANIPULATION OF FINISH GOODS
Manipulation of finish goods must be made at a grounded worktable.
It is mandatory to wear an antistatic wrist or ankle strap, connected to the antistatic floor cov-
ering or to the grounded equipment.
It is mandatory to wear antistatic gloves or finger coats.
Nylon clothing is prohibited during manipulation of parts.
The worktable must be free of any non antistatic plastic objects.
The wearing of the antistatic strap must be controlled every day.
8/39
(superficial resistivity equal to or higher than 0.5 Megohm/cm2), grounded through a ground
cable (conductive cable from protected equipment to ground isolated through a 1-Megohm
resistor placed in series).
between 0.9 and 1.5 Megohm).
5