ST62E2XC-EPB/110 STMicroelectronics, ST62E2XC-EPB/110 Datasheet - Page 17

• Manufacturer Part Number: ST62E2XC-EPB/110
• Description: BOARD PROGRAMMING FOR ST625X/6X
• Manufacturer: STMicroelectronics
• Type: MCUr

Specifications of ST62E2XC-EPB/110

• Contents: Programmer Board
• For Use With/related Products: ST7265x
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

• Epromer pin VDD connection is optional (and not recommended). If the chip is supplied by
4.5.3 In-Circuit Programming Procedure
Proceed as follows:
1 Connect the EPB to the PC parallel port,
2 Verify that no devices are plugged into the sockets,
3 Connect the EPB to the application board under power off condition,
4 Power on the application board (+5V),
5 Click on the winee icon to run the Windows Epromer program,
6 Follow the instructions on your screen.
the application power, the voltage must be 5V to avoid excessive current through the
CMOS input protection diodes. If the chip is supplied by the EPROMer, the total load cur-
rent should not exceeds 100mA and the capacitive load must be lower than 50 pF.
EPB - Remote Mode
14
17/39