ST62E2XC-EPB/110 STMicroelectronics, ST62E2XC-EPB/110 Datasheet - Page 32

• Manufacturer Part Number: ST62E2XC-EPB/110
• Description: BOARD PROGRAMMING FOR ST625X/6X
• Manufacturer: STMicroelectronics
• Type: MCUr

Specifications of ST62E2XC-EPB/110

• Contents: Programmer Board
• For Use With/related Products: ST7265x
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

EPB - Stand-Alone Mode
5.6 VERIFYING YOUR MICROCONTROLLER
To verify your microcontroller, proceed as follows:
1 If you are using a Reference MCU, make sure that you have read the appropriate reference
2 Insert the microcontroller to be programmed into the appropriate socket, depending on the
3 Set the MASTER/TARGET switch on the TARGET position,
4 Set the PROG/VERIF switch on the VERIF position,
5 Validate your settings by pressing the START switch.
The verifying process begins while the red BUSY LED (LD2) starts flashing.
The LED final status reflects the result of the operation:
32/39
MCU beforehand, and that the appropriate code has been stored in the memory of your
EPB, or
If you are using a reference EPROM, insert it in the appropriate socket, depending on the
type of EPB:
type of EPB:
When lit, the green OK LED (LD4) reports a successful end of operation.
When lit, the red ERROR LED (LD3) reports an error.
29