DM300014 Microchip Technology, DM300014 Datasheet - Page 24

• Manufacturer Part Number: DM300014
• Description: BOARD DEMO DSPICDEM 1.1 GEN PURP
• Manufacturer: Microchip Technology

Specifications of DM300014

• Processor To Be Evaluated: PIC30F
• Data Bus Width: 16 bit
• Interface Type: RS-485, CAN, SPI
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

dsPICDEM™ 1.1 Development Board User’s Guide
DS70099B-page 20
2.6.2
1. Before setting up the hardware, check that the following jumpers are in place:
2. Connect the MPLAB ICD 2 to the PC with the USB cable (see Figure 2-11).
3. Connect the MPLAB ICD 2 to the dsPICDEM 1.1 Development Board with the
4. Apply power to the board.
FIGURE 2-11:
2.6.3
1. From the Debugger menu, click Select Tool>MPLAB ICD 2 to designate the
2. From the Debugger menu, select Connect to connect the debugger to the device.
Note: MPLAB IDE may need to download new firmware if this is the first time the
AVDD_JMP:
J8:
J10:
VDD_JMP:
short RJ-11 (telephone) cable.
MPLAB ICD 2 as the debug tool in MPLAB IDE.
The MPLAB ICD 2 should report that it found the dsPIC30F6014 device, as
shown in Figure 2-12.
Connect the MPLAB ICD 2 In-Circuit Debugger
Enable MPLAB ICD 2 Connection
MPLAB ICD 2 is being used with a dsPIC30F device. Allow it to do so. If
any errors are shown, double-click the error message to get more
information.
Advance Information
dsPICDEM 1.1 DEVELOPMENT BOARD CONNECTED TO
MPLAB ICD 2 IN-CIRCUIT DEBUGGER
On
PGD/EMUD, PGC/EMUC
MCLR1
On
 2003 Microchip Technology Inc.