M5307C3 Freescale Semiconductor, M5307C3 Datasheet - Page 59

• Manufacturer Part Number: M5307C3
• Description: KIT EVALUATION FOR MCF5307
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®r
• Type: Microprocessorr

Specifications of M5307C3

• Contents: Module Board, Installation Guide, Power Supply, Cable, Software and more
• Processor To Be Evaluated: MCF5307
• Interface Type: Ethernet
• For Use With/related Products: MCF5307
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.4.21.
Usage:
The SET command
The options are listed below. If the SET command
will show the available options and values.
The board needs a RESET after this command
take effect.
baud - This is the baud rate for the first serial port on the board.
communications between dBUG and the user occur using either 9600 or 19200
bps, eight data bits, no parity, and one stop bit, 8N1. Do not choose 38400
baud.
base - This is the default radix for use in converting number
text representation to the internal quantity used by dBUG.
hexadecimal (base 16), and other choices are binary (base 2), octal (base 8),
and decimal (base 10).
client - This is the network Internet Protocol, IP, address of the board. For
network communications, the client IP is required to be set to a unique value,
usually assigned by your local network administrator.
server - This is the network IP address of the machine which contains files
accessible via TFTP.
information and can assist in properly configuring a TFTP server if
exist.
gateway
subnetwork.
same subnetwork, then this option must be properly set. Your local network
administrator will have this information.
netmask - This is the network address mask to determine if use of a gateway
is required. This field must be properly set. Your local network administrator
will have this information.
- This is the network
SET - Set Configuration
S E T
SET
If the client IP address and server IP address are not on the
SET option <value>
allows the setting of user configurable options within dBUG.
Freescale Semiconductor, Inc.
For More Information On This Product,
Your
Go to: www.freescale.com
local network
IP address of the gateway
2-35
in order for the new option(s) to
administrator will have
is issued without option, it
from their ASCII
for your local
The default is
one does not
this
All