M5407C3 Freescale Semiconductor, M5407C3 Datasheet - Page 13

• Manufacturer Part Number: M5407C3
• Description: KIT EVAL FOR MCF5407 W/ETHERNET
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®r
• Type: Microprocessorr

Specifications of M5407C3

• Contents: Module and Misc Hardware
• Processor To Be Evaluated: MCF5407
• Interface Type: Ethernet
• For Use With/related Products: MCF5407
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Freescale Semiconductor, Inc.
Chapter 1
M5407C3 Board
The M5407C3 is a versatile single board computer based on MCF5407 ColdFire®
Processor. It may be used as a powerful microprocessor based controller in a variety of
applications. With the addition of a terminal, it serves as a complete microcomputer for
reference, development/evaluation, training and educational use. The user need only
connect an RS-232 compatible terminal (or a personal computer with terminal emulation
software) and power supply to have a fully functional system.
Provisions have been made to connect this board to additional user supplied peripherals, via
the Microprocessor Expansion Bus connectors, to expand memory and I/O capabilities.
Additional peripherals may require bus buffers to minimize additional bus loading.
Furthermore, provisions have been made in the PC-board to permit configuration of the
board in a way, which best suits, an application. Options available are: upgrade to
512MBytes SDRAM, 512K SRAM, and commercially available slave PCI devices.
1.1 General Hardware Description
The M5407C3 board provides the RAM, Flash ROM, on board NE2000 compatible
Ethernet interface (10M bit/sec), RS232, and all the built-in I/O functions of the MCF5407
for learning and evaluating the attributes of the microprocessor. The MCF5407 is a member
of the ColdFire® family of processors. It is a 32-bit processor with 32-bit of address bus
and 32 lines of data. The processor has eight 32-bit data registers, eight 32-bit address
registers, a 32-bit program counter, and a 16-bit status register.
The MCF5407 has a System Integration Module referred to as the SIM. The module
incorporates many of the functions needed for system design. These include programmable
chip-select logic, System Protection logic, General purpose I/O, and Interrupt controller
logic. The chip-select logic can select up to eight memory banks and peripherals in addition
to two banks of DRAM’s. The chip-select logic also allows programmable number of
wait-states to allow the use of slower memory (refer to MCF5407 User's Manual by
Freescale for detailed information about the SIM.). The M5407C3 uses four (CS[3:0]) of
the eight chip selects to access the Flash ROM’s (CS0), PCI bridge chip (CS1), SRAM
Chapter 1. M5407C3 Board
1-1