HS7750RKCI01H Renesas Electronics America, HS7750RKCI01H Datasheet - Page 16

• Manufacturer Part Number: HS7750RKCI01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America

Specifications of HS7750RKCI01H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.2.2
In addition to BREAKPOINT functions, the emulator has Break Condition functions. Eight types
of conditions can be set under Break Condition 1, 2, 3, 4, 5, 6, 7, 8. Break Condition 5,6 use the
user break controller (UBC). Table 2.4 lists these conditions of Break Condition.
Table 2.4 Types of Break Conditions
Break Condition Type
Address bus condition (Address)
Data bus condition (Data)
ASID condition (ASID)
Bus state condition
(Bus State)
LDTLB instruction break condition
Internal I/O break condition
Note: For the window function or command-line syntax, refer to the online help.
10
Break Condition Functions
Description
Breaks when the SH7750R address bus value or the
program counter value matches the specified value.
Breaks when the SH7750R data bus value matches the
specified value. Byte, word, or longword can be specified as
the access data size.
Breaks when the SH7750R ASID value matches the
specified condition.
There are two bus state condition settings:
Read/write condition: Breaks in the read or write cycle of the
SH7750R.
Bus state condition: Breaks when the operating state in an
SH7750R bus cycle matches the specified condition.
Breaks when the SH7750R executes the LDTLB instruction.
Breaks when the SH7750R accesses the internal I/O.