HS7750RKCI01H Renesas Electronics America, HS7750RKCI01H Datasheet - Page 8
HS7750RKCI01H
Manufacturer Part Number
HS7750RKCI01H
Description
ON CHIP DEBUG EMULATOR
Manufacturer
Renesas Electronics America
Datasheets
1.HS7750RKCI01H.pdf
(264 pages)
2.HS7750RKCI01H.pdf
(38 pages)
3.HS7750RKCI01H.pdf
(9 pages)
Specifications of HS7750RKCI01H
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
1.2
To connect the E10A emulator (hereinafter referred to as the emulator), the H-UDI port connector
must be installed on the user system to connect the user system interface cable. When designing
the user system, refer to the recommended circuit between the H-UDI port connector and the
MCU. In addition, read the E10A emulator user's manual and hardware manual for the related
device.
1.3
Table 1.2 shows the recommended H-UDI port connectors for the emulator.
Table 1.2 Recommended H-UDI Port Connectors
Connector
14-pin connector
Note: Do not install any components within 3 mm of the H-UDI port connector.
1.4
Figure 1.1 shows the pin assignments of the H-UDI port connector.
Note: Note that the pin number assignments of the H-UDI port connector shown below differ
2
from those of the connector manufacturer.
Connecting the E10A Emulator with the User System
Installing the H-UDI Port Connector on the User System
Pin Assignments of the H-UDI Port Connector
Type Number
2514-6002
Manufacturer
Minnesota Mining &
Manufacturing Ltd.
Specifications
14-pin straight type