HS7750RKCI01H Renesas Electronics America, HS7750RKCI01H Datasheet - Page 25

• Manufacturer Part Number: HS7750RKCI01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America

Specifications of HS7750RKCI01H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

(a) Measurement range
Note: When the range is specified, be sure to set the measurement start and end conditions for
The emulator measures how many times the conditions of the user program specified with the
performance analysis function are satisfied. For this function, two events can be measured
simultaneously and the following conditions can be specified.
One of the following ranges can be specified by either of measurement channels 1 and 2.
1. From the start to the end of the user program execution
2. From the satisfaction of the condition set in Break Condition 1 to the satisfaction of the
When the first range is specified, the measurement result includes a several-cycle error for one
user program execution. Therefore, do not specify this range when the step is to be executed.
In addition, the user program execution stops when continuous trace is used; again, do not
specify the first range in this case.
In the second range, [PA-1 start point] and [PA-1 end point] are displayed on the [Action] part
in the [Break condition] sheet of the [Event] window.
In this case, break will not occur when the conditions of Break Condition 1 and Break
Condition 4 are satisfied.
condition set in Break Condition 4
Break Condition 1 and Break Condition 4, respectively, and then execute the user program.
If Break Condition 1 or Break Condition 4 is not set and the user program is executed,
performance is not measured normally. In this case, the following dialog box is displayed.
Figure 2.4 [Event] Window ([Break condition] Sheet)
19