HS7750RKCI01H Renesas Electronics America, HS7750RKCI01H Datasheet - Page 221

• Manufacturer Part Number: HS7750RKCI01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America

Specifications of HS7750RKCI01H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

6.
6.5.3
1. When an odd address is set, the next lowest even address is used.
2. A BREAKPOINT is accomplished by replacing instructions. Accordingly, it can be set only
to the internal RAM area. However, a BREAKPOINT cannot be set to the following
addresses:
In addition, do not perform memory write, BREAKPOINT, or download even if the memory
space can only be written by the MMU.
Break Condition 1,4 is used as the measurement range in the performance measurement
function when (P) is added as shown in figure 6.4. For setting the performance measurement
function, refer to section 6.5.7, SH7750R E10A Emulator Useful Functions. This applies
when the Break Condition is displayed with the BREAKCONDITION_DISPLAY command
in the command-line function. In this case, a break does not occur when Break Condition 1,4
is satisfied.
An address whose memory content is H'003B
An area other than the CS0 to CS6 areas and the internal RAM area
An instruction in which Break Condition 3 is satisfied
A slot instruction of a delayed branch instruction
Notes on Setting the [Breakpoint] Dialog Box
Figure 6.4 [Condition] Page
195