MCF5272VM66 Freescale Semiconductor, MCF5272VM66 Datasheet - Page 437

• Manufacturer Part Number: MCF5272VM66
• Description: IC MPU 66MHZ COLDFIRE 196-MAPBGA
• Manufacturer: Freescale Semiconductor
• Series: MCF527xr

Specifications of MCF5272VM66

• Core Processor: Coldfire V2
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SPI, UART/USART, USB
• Peripherals: DMA, WDT
• Number Of I /o: 32
• Program Memory Size: 16KB (4K x 32)
• Program Memory Type: ROM
• Ram Size: 1K x 32
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 196-MAPBGA
• Family Name: MCF5xxx
• Device Core: ColdFire
• Device Core Size: 32b
• Frequency (max): 66MHz
• Instruction Set Architecture: RISC
• Supply Voltage 1 (typ): 3.3V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 196
• Package Type: MA-BGA
• Cpu Speed: 66MHz
• Embedded Interface Type: UART, QSPI, USB, TDM
• Digital Ic Case Style: BGA
• No. Of Pins: 196
• Supply Voltage Range: 3V To 3.6V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Compliant

Signal Descriptions
can be enabled, the INT1 interrupt can be disabled, and USB power-down modes can be enabled along
with its interrupt. Then when the ISDN transceiver is activated, its interrupt request can generate the USB
wake on ring signal, which causes the host controller on the PC to initiate USB traffic to the device. This
in turn causes the USB module to wake up the CPU. Note that USB_WOR, when configured by setting
USBEPCTL0[WOR_EN], is level-sensitive.
19.12 Timer Module Signals
This section describes timer module signals.
19.12.1 Timer Input 0 (TIN0)
The timer input (TIN0) can be programmed to cause events to occur in timer counter 1. It can either clock
the event counter or provide a trigger to the timer value capture logic.
19.12.2 Timer Output (TOUT0)/PB7
Timer mode: Timer output (TOUT0) is the output from timer 0.
Port B mode: This pin can also be configured as I/O pin PB7.
19.12.3 Timer Input 1 (TIN1)/PWM Mode Output 2 (PWM_OUT2)
Timer mode: Timer input 1 (TIN1) can be programmed as an input that causes events to occur in timer
counter 2. This can either clock the event counter or provide a trigger to the timer value capture logic.
PWM mode: Pulse-width modulator 2 (PWM_OUT2) compare output.
19.12.4 Timer Output 1 (TOUT1)/PWM Mode Output 1 (PWM_OUT1)
Timer mode: Timer output (TOUT1) is the output from timer 1.
PWM mode: Pulse-width modulator 1 (PWM_OUT1) compare output.
19.13 Ethernet Module Signals
The following signals are used by the Ethernet module for data and clock signals.
These signals are multiplexed with the parallel port B PB15–PB8 signals.
19.13.1 Transmit Clock (E_TxCLK)
This is an input clock which provides a timing reference for E_TxEN, E_TxD[3:0] and E_TxER.
®
MCF5272 ColdFire
Integrated Microprocessor User’s Manual, Rev. 3
Freescale Semiconductor
19-27