IS-C1603 NKK Switches, IS-C1603 Datasheet - Page 13

• Manufacturer Part Number: IS-C1603
• Description: CONTROL FOR 36X24 LCD PB/DISPLAY
• Manufacturer: NKK Switches

Specifications of IS-C1603

• Accessory Type: Controller
• Description/function: SMARTSWITCH Development Kit
• For Use With/related Products: SmartSwitch™ Switches
• For Use With: IS01BCEF - SMARTDISPLAY SUPER YEL/GRN LEDIS01BCE - SMARTDISPLAY SUPER YELLOW LEDIS15SBFP4B - SMARTSWITCH COMPACT WHITE LEDIS15SBCP4EF - SMARTSWITCH COMPACT YEL/GRN LEDIS15SACP4CF - SMARTSWITCH COMPACT RED/GRN LEDIS15ABFP4B - SMARTSWITCH STD BLK W/WHITE LEDIS15ABDP4B - SMARTSWITCH STD BLU W/WHITE LEDIS15ABDP4EG - SMARTSWITCH STD YELLOW/BLUE LEDIS15ABDP4E - SMARTSWITCH STD BLUE W/YEL LEDIS15ABCP4EF - SMARTSWITCH STD YEL/GRN LEDIS15ABCP4E - SMARTSWITCH STD LED YELLOWIS15AACP4CF - SMARTSWITCH STD YEL RED/GRN LED360-2334 - SMARTDISPLAY RED/GREEN/BLUE360-2333 - SMARTDISPLAY SUPER RED/GREEN LED360-2332 - SMARTSWITCH STANDARD RED/GRN/BLU360-2331 - SMARTSWITCH COMPACT RED/GRN/BLU360-2330 - SMARTSWITCH STD RED/GRN LED360-2329 - SMARTSWITCH COMPACT RED/GRN LED
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 360-2427

7850 East Gelding Drive • Scottsdale, AZ 85260-3420
Command to download and insert data for the left column of a picture
[Address] is one byte with value of 01H to FFH and must be sent in ASCII HEX format.
[07H] is two byte and must be sent in ASCII HEX format (30 37).
[pixel data] is three bytes representing the 24 pixels in the column. The top-most pixel is the most significant
bit of first byte. The values must be sent in ASCII HEX format.
Command to download Attribute data to a specified Address
[Address] is one byte with value of 01H to FFH and must be sent in ASCII HEX format.
[Attribute block] is 16 bytes of Addresses and must be sent in ASCII HEX format.
Command to set the Images displayed at power up.
[CCH] is two byte and must be sent in ASCII HEX format (43 43).
[power up Addresses] is 16 bytes of Pointer values indicating what Addresses and associated Images and Page
data will be displayed upon power up or reboot. The values are from 01H to FFH and must be sent in ASCII
HEX format. The default values are 01H, 02H, 03H, …, …, 0EH, 0FH, 10H.
The controller can generate an image using the font look-up tables. The default look-up tables are ASCII
character values 20H to 7FH in fonts 5x7 and 7x10. The user can modify the default look-up tables as well as
create a user-defined look-up table for remainder of the values from 00H to FFH. Each image can hold three
lines of 6 characters in font 5x7 or two lines of 4 characters in font 7x10.
In font 7x10, the actual character picture is 10 pixel-rows high. It's padded by an extra pixel-row on the top
and bottom. These padded pixel-rows are clear (off) during "normal mode" and filled (on) during "reverse
mode" to provide line spacing between character-rows. In font 5x7, the actual character picture is 7 pixel-rows
high. It's padded on the top only with a clear (off) pixel-row to provide line spacing between character-rows.
IS-C1603 Intelligent Controller Users Manual C.doc
4. Commands to display look-up table characters at selected address.
This command inserts one column of pixel data to the left side of the image. All the columns shift to the
right. The right most column pixel data is lost
This command downloads the Attribute data to a specified Address.
This command downloads the Attribute data to a specified Address.
command format:
transmit format:
command format: 2AH [Address] [Attribute block]
transmit format:
command format:
transmit format:
Toll Free 1.877.2BUYNKK (877.228.9655) • Phone [phone] • Fax [phone]
(xxH)
(xxH)
(xxH) (xxAH)
27H
21H
IS-C1603 Intelligent Controller Users
www.nkkswitches.com • Email [e-mail]
[Address] [07H] [pixel data]
[CCH] [power up Addresses]
(xxAH)
(xxAH)
(xxH)
(xxAH)
Manual
(xxAH)
(xxAH)
Page 13 of 45
0110