IS-C1603 NKK Switches, IS-C1603 Datasheet - Page 4

• Manufacturer Part Number: IS-C1603
• Description: CONTROL FOR 36X24 LCD PB/DISPLAY
• Manufacturer: NKK Switches

Specifications of IS-C1603

• Accessory Type: Controller
• Description/function: SMARTSWITCH Development Kit
• For Use With/related Products: SmartSwitch™ Switches
• For Use With: IS01BCEF - SMARTDISPLAY SUPER YEL/GRN LEDIS01BCE - SMARTDISPLAY SUPER YELLOW LEDIS15SBFP4B - SMARTSWITCH COMPACT WHITE LEDIS15SBCP4EF - SMARTSWITCH COMPACT YEL/GRN LEDIS15SACP4CF - SMARTSWITCH COMPACT RED/GRN LEDIS15ABFP4B - SMARTSWITCH STD BLK W/WHITE LEDIS15ABDP4B - SMARTSWITCH STD BLU W/WHITE LEDIS15ABDP4EG - SMARTSWITCH STD YELLOW/BLUE LEDIS15ABDP4E - SMARTSWITCH STD BLUE W/YEL LEDIS15ABCP4EF - SMARTSWITCH STD YEL/GRN LEDIS15ABCP4E - SMARTSWITCH STD LED YELLOWIS15AACP4CF - SMARTSWITCH STD YEL RED/GRN LED360-2334 - SMARTDISPLAY RED/GREEN/BLUE360-2333 - SMARTDISPLAY SUPER RED/GREEN LED360-2332 - SMARTSWITCH STANDARD RED/GRN/BLU360-2331 - SMARTSWITCH COMPACT RED/GRN/BLU360-2330 - SMARTSWITCH STD RED/GRN LED360-2329 - SMARTSWITCH COMPACT RED/GRN LED
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 360-2427

7850 East Gelding Drive • Scottsdale, AZ 85260-3420
2. Compatible Logic Boards
Switch Logic Boards: PCB’s with mounted switches or displays that are used for this controller are called Logic
Boards. There are many Logic Boards available. All the Logic Boards have two 7x2 connectors and can be
daisy chained via 14 pin ribbon cables. JP2 of the IS-C1603 gets connected to J1 of the first Logic Board, J2 of
the first Logic Board gets connected to J1 of the second Logic Board and so on. The red wire of the ribbon
cable, indicating pin 1, must be connected to pin 1 for all connections. There are two types of Logic Boards, 2
bits and 4 bits. Only one type of board can be used at any one time. The J2 jumper is used to select which type
of logic boards will be used with the IS-C1603. If the jumper is not selected properly or the two types of logic
boards are mixed together unpredictable behavior will result.
The following is a list of compatible Logic Boards and switches.
RGB, 4 bit:
Bicolor/single color, 4 bit:
Bicolor/single color, 2 bit:
Note: Make sure the power is off when connecting or disconnecting the Logic Boards to or from the
controller or each other.
• Download characters and controller will create graphic data using 5x7 font for any address.
• Download characters and controller will create graphic data using 7x10 font for any address.
• Control any single pixel on any LCD module.
• Change backlight color on any LCD module.
A. IS-L0204-C
B. IS-L0251-C
C. IS-L0271-C
D. IS-L0107-IS15ABFP4RGB One LCD 36x24 RGB, 4 bit.
E. IS-L0205-C
F. IS-L0102-SW#
G. IS-L0103-C
H. IS-L0201-C
I. IS-L0301-C
J. IS-L0302-C
K. IS-L0401-C
L. IS-L0601-C
M. IS-L0901-C
N. IS-L1002-C
O. IS-L1502-C
IS-C1603 Intelligent Controller Users Manual C.doc
Toll Free 1.877.2BUYNKK (877.228.9655) • Phone [phone] • Fax [phone]
New Logic Boards can be designed based on customer requirements.
Two LCD 36x24 RGB, 4 bit
Two LCD 36x24 RGB Display, 4 bit
Two LCD 36x24 RGB Compact, 4 bit
Two LCD 36x24 Bicolor/single color, 4 bit
One LCD 36x24 Bicolor/single color, 2 bit.
Two LCD 36x24 Bicolor/single color, 2 bit, 1x2 (VxH) (spacing between the switches).
Three LCD 36x24 Bicolor/single color, 2 bit, 1x3 (VxH).
Three LCD 36x24 Bicolor/single color, 2 bit, 3x1 (VxH).
Four LCD 36x24 Bicolor/single color, 2 bit, 2x2 (VxH), side by side stackable.
Six LCD 36x24 Bicolor/single color, 2 bit, 2x3 (VxH).
Nine LCD 36x24 Bicolor/single color, 2 bit, 3x3 (VxH), side by side stackable.
Ten LCD 36x24 Bicolor/single color, 2 bit, 5x2 (VxH), side by side stackable.
Fifteen LCD 36x24 Bicolor/single color, 2 bit, 5x3 (VxH), side by side stackable.
One LCD 36x24 Bicolor/single color, 2 bit. No mounting hole. Must be used with
Panel Mount housing.
IS-C1603 Intelligent Controller Users
www.nkkswitches.com • Email [e-mail]
Manual
Page 4 of 45
0110