IS-C1603 NKK Switches, IS-C1603 Datasheet - Page 22

• Manufacturer Part Number: IS-C1603
• Description: CONTROL FOR 36X24 LCD PB/DISPLAY
• Manufacturer: NKK Switches

Specifications of IS-C1603

• Accessory Type: Controller
• Description/function: SMARTSWITCH Development Kit
• For Use With/related Products: SmartSwitch™ Switches
• For Use With: IS01BCEF - SMARTDISPLAY SUPER YEL/GRN LEDIS01BCE - SMARTDISPLAY SUPER YELLOW LEDIS15SBFP4B - SMARTSWITCH COMPACT WHITE LEDIS15SBCP4EF - SMARTSWITCH COMPACT YEL/GRN LEDIS15SACP4CF - SMARTSWITCH COMPACT RED/GRN LEDIS15ABFP4B - SMARTSWITCH STD BLK W/WHITE LEDIS15ABDP4B - SMARTSWITCH STD BLU W/WHITE LEDIS15ABDP4EG - SMARTSWITCH STD YELLOW/BLUE LEDIS15ABDP4E - SMARTSWITCH STD BLUE W/YEL LEDIS15ABCP4EF - SMARTSWITCH STD YEL/GRN LEDIS15ABCP4E - SMARTSWITCH STD LED YELLOWIS15AACP4CF - SMARTSWITCH STD YEL RED/GRN LED360-2334 - SMARTDISPLAY RED/GREEN/BLUE360-2333 - SMARTDISPLAY SUPER RED/GREEN LED360-2332 - SMARTSWITCH STANDARD RED/GRN/BLU360-2331 - SMARTSWITCH COMPACT RED/GRN/BLU360-2330 - SMARTSWITCH STD RED/GRN LED360-2329 - SMARTSWITCH COMPACT RED/GRN LED
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 360-2427

7850 East Gelding Drive • Scottsdale, AZ 85260-3420
B3=0 ---> No transmission.
B3=1 ---> Upon switch press, transmit the Pointer value of the Module in ASCII HEX format.
B4=0 ---> No transmission.
B4=1 ---> Upon switch press, transmit from the user-defined Image press event data. Up to 16 bytes or until a
B5=0 ---> Do not execute the Attributes.
B5=1 ---> Execute Attributes upon switch press or release based on the status of Flag-B bit 2.
B6=0 ---> Disable buzzer.
B6=1 ---> Enable buzzer. Beep when any switch is pressed.
B7=0 ---> Normal operation mode.
B7=1 ---> Animated Image operation. A Module with a Pointer value above 127 (7FH) will have its image
Flag Byte B bit settings:
IS-C1603 Intelligent Controller Users Manual C.doc
B0
B1
B2
B3
B4
B5
B6
B7
Bit
Flag Byte B Default Value=60H
byte value is 00H.
continuously step through 8 Addresses. The alternating addresses are as follow:
80H to 87H, 88H to 8FH, 90H to 97H,……,F0H to F7H,F8H to FFH
The alternating time is determined based on two user-defined variables and a constant.
Alternating time in ms = (20) (Animation Timer) (Animation Multiplier)
Enable
Value
Toll Free 1.877.2BUYNKK (877.228.9655) • Phone [phone] • Fax [phone]
0
1
1
1
1
1
1
1
LCD/LED code from storage
Power-up Pointer values
Execute Attribute for Switch
press/release event
LED Image press event
XON/XOFF enable
79H flag
61H flag
Controller polling
IS-C1603 Intelligent Controller Users
www.nkkswitches.com • Email [e-mail]
Flag
Manual
Uses the LCD/LED Code from storage.
Default is enabled.
Upon power-up/reboot use the pointer
values that were in effect before power
down/reboot.
Execute Attribute upon switch release
instead of switch press event, Flag-A bit5
must be set.
LED backlight change to user-defined
color when a switch is pressed.
Uses XON/XOFF protocol to
communicate. Bit B7 must be enabled.
79H is transmitted upon completion of
command.
61H is transmitted in response to
command.
Uses XON/XOFF protocol to
communicate. Bit B4 must be enabled.
Controller action when flag is set
Page 22 of 45
0110