IS-C1603 NKK Switches, IS-C1603 Datasheet - Page 16

• Manufacturer Part Number: IS-C1603
• Description: CONTROL FOR 36X24 LCD PB/DISPLAY
• Manufacturer: NKK Switches

Specifications of IS-C1603

• Accessory Type: Controller
• Description/function: SMARTSWITCH Development Kit
• For Use With/related Products: SmartSwitch™ Switches
• For Use With: IS01BCEF - SMARTDISPLAY SUPER YEL/GRN LEDIS01BCE - SMARTDISPLAY SUPER YELLOW LEDIS15SBFP4B - SMARTSWITCH COMPACT WHITE LEDIS15SBCP4EF - SMARTSWITCH COMPACT YEL/GRN LEDIS15SACP4CF - SMARTSWITCH COMPACT RED/GRN LEDIS15ABFP4B - SMARTSWITCH STD BLK W/WHITE LEDIS15ABDP4B - SMARTSWITCH STD BLU W/WHITE LEDIS15ABDP4EG - SMARTSWITCH STD YELLOW/BLUE LEDIS15ABDP4E - SMARTSWITCH STD BLUE W/YEL LEDIS15ABCP4EF - SMARTSWITCH STD YEL/GRN LEDIS15ABCP4E - SMARTSWITCH STD LED YELLOWIS15AACP4CF - SMARTSWITCH STD YEL RED/GRN LED360-2334 - SMARTDISPLAY RED/GREEN/BLUE360-2333 - SMARTDISPLAY SUPER RED/GREEN LED360-2332 - SMARTSWITCH STANDARD RED/GRN/BLU360-2331 - SMARTSWITCH COMPACT RED/GRN/BLU360-2330 - SMARTSWITCH STD RED/GRN LED360-2329 - SMARTSWITCH COMPACT RED/GRN LED
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 360-2427

7850 East Gelding Drive • Scottsdale, AZ 85260-3420
Command to display 4 characters for the first line of font 7x10 in inverse mode.
[Address] is one byte with value of 01H to FFH and must be sent in ASCII HEX format.
[0CH] is two byte and must be sent in ASCII HEX format (30 43).
[ASCII string] is 4 bytes and is a string of font 7x10 look-up table indexes. It must be sent in HEX format.
Command to display 4 characters for the second line of font 7x10 in inverse mode.
[Address] is one byte with value of 01H to FFH and must be sent in ASCII HEX format.
[0DH] is two byte and must be sent in ASCII HEX format (30 44).
[ASCII string] is 4 bytes and is a string of font 7x10 look-up table indexes. It must be sent in HEX format.
Command to download user-defined Switch Press event for a switch.
[AAH] is two byte and must be sent in ASCII HEX format (41 41).
[Module #] is one byte with value of 01H to 10H and must be sent in ASCII HEX format.
[number] is one byte which indicates the number of bytes. Only the lower nibble is used.
[string] may consist of up to a maximum of 15 bytes according to the lower nibble of the [number].
All default values for this section are 00H.
IS-C1603 Intelligent Controller Users Manual C.doc
5. Commands to download to Look-up tables.
This command sets the image data at a specified address with the first line of 4 characters of font 7X10.
The first line is white characters on black background. No changes made to the other line.
This command sets the image data at a specified address with the second line of 4 characters of font
7X10. The second line is white characters on black background. No changes made to the other line.
This command sets user-defined actions taken when the specified switch is pressed using the look-up
table.
command format:
transmit format:
command format:
transmit format:
command format:
transmit format:
a. Switch Report Look-up Table:
Toll Free 1.877.2BUYNKK (877.228.9655) • Phone [phone] • Fax [phone]
(xxH)
(xxH)
(xxH) (xxAH)
27H
27H
21H
IS-C1603 Intelligent Controller Users
www.nkkswitches.com • Email [e-mail]
[Address] [0CH] [ASCII string]
[Address] [0DH] [ASCII string]
[AAH] [Module #] [number] [string]
(xxAH)
(xxAH)
(xxAH)
(xxAH)
(xxAH)
Manual
(xxH)
(xxH)
(xxH)
(xxH)
Page 16 of 45
0110