PEF82912FV1.4 Infineon Technologies, PEF82912FV1.4 Datasheet - Page 126

• Manufacturer Part Number: PEF82912FV1.4
• Description: ISDN Interface ISDN
• Manufacturer: Infineon Technologies

Specifications of PEF82912FV1.4

• Mounting Style: SMD/SMT
• Package / Case: MQFP-64
• Lead Free Status / Rohs Status: Details

PEF 82912/82913
Functional Description
G1 Deactivated
The S-transceiver is not transmitting. There is no signal detected on the S/T-interface,
and no activation command is received in the C/I channel. Activation is possible from the
S/T interface and from the IOM -2 interface.
G1 I0 Detected
An INFO 0 is detected on the S/T-interface, translated to an “Activation Request”
indication in the C/I channel. The S-transceiver is waiting for an AR command, which
normally indicates that the transmission line upstream is synchronized.
G2 Pending Activation
As a result of the ARD command, an INFO 2 is sent on the S/T-interface. INFO 3 is not
yet received. In case of ARL command, loop 2 is closed.
G2 wait for AID
INFO 3 was received, INFO 2 continues to be transmitted while the S-transceiver waits
for a “switch-through” command AID from the device upstream.
G3 Activated
INFO 4 is sent on the S/T-interface as a result of the “switch through” command AID: the
B and D-channels are transparent. On the command AIL, loop 2 is closed.
G2 Lost Framing S/T
This state is reached when the transceiver has lost synchronism in the state G3
activated.
G3 Lost Framing U
On receiving an RSY command which usually indicates that synchronization has been
lost on the transmission line, the S-transceiver transmits INFO 2.
G4 Pending Deactivation
This state is triggered by a deactivation request DR, and is an unstable state. Indication
DI (state “G4 wait for DR”) is issued by the transceiver when:
either INFO0 is received for a duration of 16 ms
or an internal timer of 32 ms expires.
Data Sheet
112
2001-03-30