TMPM364F10FG Toshiba, TMPM364F10FG Datasheet - Page 549

• Manufacturer Part Number: TMPM364F10FG
• Manufacturer: Toshiba

Specifications of TMPM364F10FG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 1024K
• Rom Type: Flash
• Ram (kbytes): 64K
• Number Of Pins: 144
• Package: LQFP(20x20)
• Vcc: 3V
• Cpu Mhz: 64
• Ssp (ch) Spi: 1
• I2c/sio (ch): 5
• Uart/sio (ch): 12
• Usb: Host
• Can: 1
• Ethernet: -
• External Bus Interface: Y
• Cs/wait Controller (ch): 4
• Dma Controller: 2
• 10-bit Da Converter: -
• 10-bit Ad Converter: 16
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 16
• Motor / Igbt Control: -
• Real Time Clock: Y
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: Y
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit

15.4.3.5
15.4.3.6
pletion interrupt.
mission.
of starting the transmission.
(2)
(3)
(4)
To stop transmission, send data including the EOM bit that indicates "1". This generates a transmit com-
Please note that proper operation is not ensured if the start bit of transmission is set to "0" during trans-
Transmission is stopped by error detection. To retry the transmission, configure the condition and data
Stopping Transmission
Retransmission
fied in the CECTCR <CECBRD> bit.
mission of a byte of data, the transmit buffer underrun has priority.
An ACK error interrupt occurs when an ACK response does not conform to the configuration speci-
When the ACK error interrupt occurs, the CECTSTAT <CECTIACK> bit is set.
The ACK error is detected in the following cases.
A transmit buffer underrun error is caused by the following sequence.
1. Data in the transmit buffer is transmit to the shift register.
2. An interrupt occurs.
3. A byte of data is transmitted.
4. No data is set to the transmit buffer before starting transmission of a byte of subsequent data.
When an underrun error occurs, the CECTSTAT <CECTIUR> bit is set.
If interrupt factors of the ACK error and transmit buffer underrun are detected at the end of trans-
The transmit buffer underrun interrupt occurs first and then the ACK error interrupt occurs.
ACK error
Transmit Buffer Underrun
Order of ACK Error and Transmit Buffer Overrun
Broadcast transmission?: Yes
Broadcast transmission?: No
<CECBRD> = 0
<CECBRD> = 1
Configuration
Page 523
ACK response is logical "1"
ACK response is logical "0"
Determined as an ACK error when
TMPM364F10FG