LAN9217-MT-E2 SMSC [SMSC Corporation], LAN9217-MT-E2 Datasheet - Page 19

• Manufacturer Part Number: LAN9217-MT-E2
• Description: 16-bit High-Performance Single-Chip 10/100 Ethernet Controller with HP Auto-MDIX
• Manufacturer: SMSC [SMSC Corporation]

16-bit High-Performance Single-Chip 10/100 Ethernet Controller with HP Auto-MDIX
Datasheet
SMSC LAN9217
3,65
1,66
NO.
PIN
11
7
4
8
Reference Ground
Reference Power
Note 2.1
Core Voltage
Core Ground
PLL Ground
Decoupling
PLL Power
NAME
Please refer to the SMSC application note AN 12.5x, entitled "Designing with the LAN9218
Family - Getting Started". It is also important to note that this application note applies to
the whole SMSC LAN9118 family of Ethernet controllers. However, subtle differences may
apply.
Table 2.5 System and Power Signals (continued)
GND_CORE
VDD_CORE
VDD_REF
VDD_PLL
VSS_REF
VSS_PLL
SYMBOL
DATASHEET
BUFFER
TYPE
19
P
P
P
P
P
P
PINS
NUM
2
2
1
1
1
1
1.8 V from internal core regulator.
Both pins must be connected
together externally and then tied to a
10uF 0.1-Ohm ESR capacitor, in
parallel with a 0.01uF capacitor to
Ground next to each pin. See
Note 2.1
Ground for internal digital logic
1.8V Power from the internal PLL
regulator. This external pin must be
connected to a 10uF 0.1-Ohm ESR
capacitor, in parallel with a 0.01uF
capacitor to Ground. See
GND for the PLL
Connected to 3.3v power and used
as the reference voltage for the
internal PLL
Ground for internal PLL reference
voltage
DESCRIPTION
Revision 1.5 (07-18-06)
Note 2.1