SSD1339U3 ETC1 [List of Unclassifed Manufacturers], SSD1339U3 Datasheet - Page 42

• Manufacturer Part Number: SSD1339U3
• Description: 132RGB x 132 with 2 smart Icon lines Dot Matrix OLED/PLED Segment/Common Driver with Controller
• Manufacturer: ETC1 [List of Unclassifed Manufacturers]

Graphic Acceleration command set description
Draw Line (83h)
This command draws a line by the given start, end column and row coordinates and the color of the line.
For example, the line above can be drawn by the following command sequence.
Draw Rectangle (84h)
Given the starting point (Row 1, Column 1) and the ending point (Row 2, Column 2), specify the outline
and fill area colors, a rectangle that will be drawn with the color specified. Remarks: If fill color option is
disabled, the enclosed area will not be filled.
The following example illustrates the rectangle drawing command sequence.
Solomon Systech
1. Enter into draw line mode by command 21h
2. Send column start address of line, column1, for example = 1h
3. Send row start address of line, row 1, for example = 10h
4. Send column end address of line, column 2, for example = 28h
5. Send row end address of line, row 2, for example = 4h
6. Send color C, B and A of line, for example = 35d, 0d, 0d for blue color
1. Enter the “draw rectangle mode” by execute the command 22h
2. Set the starting column coordinates, Column 1. e.g., 03h.
3. Set the starting row coordinates, Row 1. e.g., 02h.
4. Set the finishing column coordinates, Column 2. e.g., 12h
5. Set the finishing row coordinates, Row 2. e.g., 15h
6. Set the outline color C, B and A. e.g., (28d, 0d, 0d) for blue color
7. Set the filled color C, B and A. e.g., (0d, 0d, 40d) for red color
Outline
Color
Row 1,
Column 1
Row 1,
Column 1
Figure 28 – Example of draw rectangle command
Line
Color
Figure 27 – Example of draw line command
Row 2,
Column 2
Filled
Color
Row 2,
Column 2
Jul 2005
P 42/59 Rev 1.1
SSD1339