IDT72V51333L7-5BB8 IDT, Integrated Device Technology Inc, IDT72V51333L7-5BB8 Datasheet - Page 6

• Manufacturer Part Number: IDT72V51333L7-5BB8
• Description: IC FLOW CTRL MULTI QUEUE 256-BGA
• Manufacturer: IDT, Integrated Device Technology Inc

Specifications of IDT72V51333L7-5BB8

• Configuration: Dual
• Density: 512Kb
• Access Time (max): 4ns
• Word Size: 18b
• Organization: 4Kx18x8
• Sync/async: Synchronous
• Expandable: Yes
• Bus Direction: Uni-Directional
• Package Type: BGA
• Clock Freq (max): 133MHz
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (min): 3.15V
• Operating Supply Voltage (max): 3.45V
• Supply Current: 100mA
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 256
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 72V51333L7-5BB8

PIN DESCRIPTIONS
IDT72V51333/72V51343/72V51353 3.3V, MULTI-QUEUE FLOW-CONTROL DEVICES
(8 QUEUES) 18 BIT WIDE CONFIGURATION 589,824, 1,179,648 and 2,359,296 bits
D[17:0]
Din
DF
DFM
ESTR
ESYNC
EXI
EXO
FF
FM
FSTR
FSYNC
Symbol
(1)
(1)
(1)
Data Input Bus
Default Flag
Default Mode
PAEn Flag Bus
Strobe
PAEn Bus Sync
PAEn Bus
Expansion In
PAEn Bus
Expansion Out
Full Flag
Flag Mode
PAFn Flag Bus
Strobe
PAFn Bus Sync
Name
I/O TYPE
OUTPUT during Polled operation of the PAEn bus. During Polled operation each devices queue status flags are
OUTPUT bus operation has been selected . EXO of device ‘N’ connects directly to EXI of device ‘N+1’. This pin pulses
OUTPUT write operations, (selected via WCLK, WRADD bus and WADEN). On the WCLK cycle after a queue
OUTPUT during Polled operation of the PAFn bus. During Polled operation each quadrant of queue status flags is
LVTTL
INPUT
LVTTL
INPUT
LVTTL
INPUT
LVTTL
INPUT
LVTTL
LVTTL
INPUT
LVTTL
LVTTL
LVTTL
INPUT
LVTTL
INPUT
LVTTL
These are the 18 data input pins. Data is written into the device via these input pins on the rising edge
of WCLK provided that WEN is LOW. Due to bus matching not all inputs may be used, any unused inputs
should be tied LOW.
If the user requires default programming of the multi-queue device, this pin must be setup before Master
Reset and must not toggle during any device operation. The state of this input at master reset determines
the value of the PAE/PAF flag offsets. If DF is LOW the value is 8, if DF is HIGH the value is 128.
The multi-queue device requires programming after master reset. The user can do this serially via the
serial port, or the user can use the default method. If DFM is LOW at master reset then serial mode will be
selected, if HIGH then default mode is selected.
If direct operation of the PAEn bus has been selected, the ESTR input is used in conjunction with RCLK
and the RDADD bus to select a device for its queues to be placed on to the PAEn bus outputs. A device
addressed via the RDADD bus is selected on the rising edge of RCLK provided that ESTR is HIGH. If
Polled operations has been selected, ESTR should be tied inactive, LOW. Note, that a PAEn flag bus
selection cannot be made, (ESTR must NOT go active) until programming of the part has been completed
and SENO has gone LOW.
ESYNC is an output from the multi-queue device that provides a synchronizing pulse for the PAEn bus
loaded on to the PAEn bus outputs sequentially based on RCLK. The first RCLK rising edge loads device 1
on to PAEn, the second RCLK rising edge loads device 2 and so on. During the RCLK cycle that a selected
device is placed on to the PAEn bus, the ESYNC output will be HIGH.
The EXI input is used when multi-queue devices are connected in expansion mode and Polled PAEn
bus operation has been selected . EXI of device ‘N’ connects directly to EXO of device ‘N-1’. The EXI
receives a token from the previous device in a chain. In single device mode the EXI input must be tied
LOW if the PAEn bus is operated in direct mode. If the PAEn bus is operated in polled mode the EXI
input must be connected to the EXO output of the same device. In expansion mode the EXI of the first
device should be tied LOW, when direct mode is selected.
EXO is an output that is used when multi-queue devices are connected in expansion mode and Polled PAEn
HIGH when device N places its PAE status on to the PAEn bus with respect to RCLK. This pulse
(token) is then passed on to the next device in the chain ‘N+1’ and on the next RCLK rising edge the first
quadrant of device N+1 will be loaded on to the PAEn bus. This continues through the chain and EXO
of the last device is then looped back to EXI of the first device. The ESYNC output of each device in the
chain provides synchronization to the user of this looping event.
This pin provides the full flag output for the active queue, that is, the queue selected on the input port for
selection, this flag will show the status of the newly selected queue. Data can be written to this queue on
the next cycle provided FF is HIGH. This flag has High-Impedance capability, this is important during
expansion of devices, when the FF flag output of up to 8 devices may be connected together on a common
line. The device with a queue selected takes control of the FF bus, all other devices place their FF output
into High-Impedance. When a queue selection is made on the write port this output will switch from
High-Impedance control on the next WCLK cycle. This flag is synchronized to WCLK.
This pin is setup before a master reset and must not toggle during any device operation. The state of the
FM pin during Master Reset will determine whether the PAFn and PAEn flag busses operate in either Polled
or Direct mode. If this pin is HIGH the mode is Polled, if LOW then it will be Direct.
If direct operation of the PAFn bus has been selected, the FSTR input is used in conjunction with WCLK
and the WRADD bus to select a device for its queues to be placed on to the PAFn bus outputs. A device
addressed via the WRADD bus is selected on the rising edge of WCLK provided that FSTR is HIGH. If
Polled operations has been selected, FSTR should be tied inactive, LOW. Note, that a PAFn flag bus
selection cannot be made, (FSTR must NOT go active) until programming of the part has been completed
and SENO has gone LOW.
FSYNC is an output from the multi-queue device that provides a synchronizing pulse for the PAFn bus
6
Description
COMMERCIAL AND INDUSTRIAL
TEMPERATURE RANGES