PIC18F6310-I/PT Microchip Technology, PIC18F6310-I/PT Datasheet - Page 134

• Manufacturer Part Number: PIC18F6310-I/PT
• Description: IC PIC MCU FLASH 4KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F6310-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 8KB (4K x 16)
• Package / Case: 64-TFQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 54
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 768 B
• Interface Type: SPI/I2C/EUSART/AUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 54
• Number Of Timers: 4
• Operating Supply Voltage: 4.2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136, DM183032
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT64PT5 - SOCKET TRAN ICE 64MQFP/TQFPAC164319 - MODULE SKT MPLAB PM3 64TQFPDV007003 - PROGRAMMER UNIVERSAL PROMATE II
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC18F6310/6410/8310/8410
10.6
PORTF is an 8-bit wide, bidirectional port. The corre-
sponding data direction register is TRISF. Setting a
TRISF bit (= 1) will make the corresponding PORTF pin
an input (i.e., put the corresponding output driver in a
high-impedance mode). Clearing a TRISF bit (= 0) will
make the corresponding PORTF pin an output (i.e., put
the contents of the output latch on the selected pin).
The Data Latch register (LATF) is also memory
mapped. Read-modify-write operations on the LATF
register read and write the latched output value for
PORTF.
All pins on PORTF are implemented with Schmitt
Trigger input buffers. Each pin is individually
configurable as an input or output.
PORTF is multiplexed with several analog peripheral
functions, including the A/D converter and comparator
inputs, as well as the comparator outputs. Pins RF2
through RF6 may be used as comparator inputs or
outputs by setting the appropriate bits in the CMCON
register. To use RF3:RF6 as digital inputs, it is also
necessary to turn off the comparators.
DS39635A-page 132
Note:
PORTF, LATF and TRISF Registers
On a Power-on Reset, RA5 and RA3:RA0
are configured as analog inputs and read
as ‘0’. RA4 is configured as a digital input.
Preliminary
EXAMPLE 10-6:
CLRF
CLRF
MOVLW
MOVWF
MOVLW
MOVWF
MOVLW
MOVWF
Note 1: On a Power-on Reset, the RF6:RF0 pins
2: To configure PORTF as digital I/O, turn off
PORTF
LATF
0x07
CMCON
0x0F
ADCON1 ; Set PORTF as digital I/O
0xCF
TRISF
are configured as inputs and read as ‘0’.
comparators and set ADCON1 value.
; Initialize PORTF by
; clearing output
; data latches
; Alternate method
; to clear output
; data latches
;
; Turn off comparators
;
; Value used to
; initialize data
; direction
; Set RF3:RF0 as inputs
; RF5:RF4 as outputs
; RF7:RF6 as inputs
INITIALIZING PORTF
 2004 Microchip Technology Inc.