AT90PWM316-16MU Atmel, AT90PWM316-16MU Datasheet - Page 259

• Manufacturer Part Number: AT90PWM316-16MU
• Description: MCU AVR 16K FLASH 16MHZ 32-QFN
• Manufacturer: Atmel
• Series: AVR® 90PWM Lightingr

Specifications of AT90PWM316-16MU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 27
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 11x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 32-QFN
• Processor Series: AT90PWMx
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: SPI, USART
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 2
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATAVRFBKIT, ATAVRISP2
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 11 Channel
• Cpu Family: 90P
• Device Core: AVR
• Device Core Size: 8b
• Frequency (max): 16MHz
• Total Internal Ram Size: 1KB
• # I/os (max): 53
• Number Of Timers - General Purpose: 2
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 2.7V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 105C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 32
• Package Type: QFN EP
• For Use With: ATSTK600-SOIC - STK600 SOCKET/ADAPTER FOR SOICATAVRMC200 - KIT EVAL FOR AT90PWM3 ASYNCATAVRFBKIT - KIT DEMO BALLAST FOR AT90PWM2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

22. Digital to Analog Converter - DAC
22.1
7710E–AVR–08/10
Features
•
•
•
•
•
•
The AT90PWM216/316 features a 10-bit Digital to Analog Converter. This DAC can be used for
the analog comparators and/or can be output on the D2A pin of the microcontroller via a dedi-
cated driver.
This allow to drive (worst case) a 1nF capacitance in parallel with a resistor higher than 33K load
with a time constant around 1us. Response time and power consumption are improved by
reducing the load (reducing the capacitor value and increasing the load resistor value (The best
case is a high impedance)).
The DAC has a separate analog supply voltage pin, AV
0.3V from V
pin.
The reference voltage is the same as the one used for the ADC,
– ADMUX” on page
age reference may be externally decoupled at the AREF pin by a capacitor for better noise
performance.
10 bits resolution
8 bits linearity
+/- 0.5 LSB accuracy between 150mV and AVcc-150mV
Vout = DAC*Vref/1023
The DAC could be connected to the negative inputs of the analog comparators and/or to a
dedicated output driver.
Output impedance around 100 Ohm.
CC
. See the paragraph
248.. These nominally 2.56V Vref or AV
“ADC Noise Canceler” on page 242
CC
. AV
CC
AT90PWM216/316
are provided On-chip. The volt-
CC
See “ADC Multiplexer Register
must not differ more than ±
on how to connect this
259