PIC18F8310-E/PT Microchip Technology, PIC18F8310-E/PT Datasheet - Page 241

• Manufacturer Part Number: PIC18F8310-E/PT
• Description: IC PIC MCU FLASH 8KX16 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F8310-E/PT

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: EBI/EMI, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 8KB (4K x 16)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 80-TFQFP
• For Use With: XLT80PT3 - SOCKET TRAN ICE 80MQFP/TQFPAC164320 - MODULE SKT MPLAB PM3 80TQFPAC174011 - MODULE SKT PROMATEII 80TQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

19.0
The Addressable Universal Synchronous Asynchro-
nous Receiver Transmitter (AUSART) module is very
similar in function to the Enhanced USART module,
discussed in the previous chapter. It is provided as an
additional channel for serial communication with
external devices, for those situations that do not require
Auto-Baud Detection (ABD) or LIN/J2602 bus support.
The AUSART can be configured in the following
modes:
• Asynchronous (full-duplex)
• Synchronous – Master (half-duplex)
• Synchronous – Slave (half-duplex)
 2010 Microchip Technology Inc.
ADDRESSABLE UNIVERSAL
SYNCHRONOUS
ASYNCHRONOUS RECEIVER
TRANSMITTER (AUSART)
PIC18F6310/6410/8310/8410
The pins of the AUSART module are multiplexed with
the
RG2/RX2/DT2, respectively). In order to configure
these pins as an AUSART:
• SPEN bit (RCSTA2<7>) must be set (= 1)
• TRISG<2> bit must be set (= 1)
• TRISG<1> bit must be cleared (= 0) for
• TRISG<1> bit must be set (= 1) for Synchronous
The operation of the Addressable USART module is
controlled through two
RXSTA2. These are detailed in
Register 19-2
Asynchronous and Synchronous Master modes
Slave mode
Note:
functions
The USART control will automatically
reconfigure the pin from input to output as
needed.
respectively.
of
PORTG
registers:
(RG1/TX2/CK2
DS39635C-page 241
Register 19-1
TXSTA2
and
and
and