PIC18F8310-E/PT Microchip Technology, PIC18F8310-E/PT Datasheet - Page 31

• Manufacturer Part Number: PIC18F8310-E/PT
• Description: IC PIC MCU FLASH 8KX16 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F8310-E/PT

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: EBI/EMI, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 8KB (4K x 16)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 80-TFQFP
• For Use With: XLT80PT3 - SOCKET TRAN ICE 80MQFP/TQFPAC164320 - MODULE SKT MPLAB PM3 80TQFPAC174011 - MODULE SKT PROMATEII 80TQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

2.0
2.1
Getting started with the PIC18F6310/6410/8310/8410
family of 8-bit microcontrollers requires attention to a
minimal set of device pin connections before
proceeding with development.
The following pins must always be connected:
• All V
• All AV
• MCLR pin
These pins must also be connected if they are being
used in the end application:
• PGC/PGD pins used for In-Circuit Serial
• OSCI and OSCO pins when an external oscillator
Additionally, the following pins may be required:
• V
The minimum mandatory connections are shown in
Figure
 2010 Microchip Technology Inc.
(see
not the analog device features are used
(see
(see
Programming™ (ICSP™) and debugging purposes
(see
source is used
(see
reference for analog modules is implemented
Note:
REF
DD
2-1.
Section 2.2 “Power Supply
Section 2.2 “Power Supply
Section 2.3 “Master Clear (MCLR)
Section 2.4 “ICSP
Section 2.5 “External Oscillator
+/V
DD
GUIDELINES FOR GETTING
STARTED WITH PIC18F
MICROCONTROLLERS
Basic Connection Requirements
and V
REF
and AV
The AV
connected, regardless of whether any of
the analog modules are being used.
- pins are used when external voltage
SS
SS
pins
DD
pins, regardless of whether or
and AV
Pins”)
SS
pins must always be
Pins”)
Pins”)
Pins”)
Pin”)
PIC18F6310/6410/8310/8410
FIGURE 2-1:
V
Key (all values are recommendations):
C1 through C6: 0.1 µF, 20V ceramic
R1: 10 kΩ
R2: 100Ω to 470Ω
Note 1:
DD
C6
R1
C1
(1)
R2
The example shown is for a PIC18F device
with five V
Other devices may have more or less pairs;
adjust the number of decoupling capacitors
appropriately.
MCLR
V
V
SS
DD
C5
DD
PIC18FXXXX
RECOMMENDED
MINIMUM CONNECTIONS
(1)
/V
SS
C2
and AV
(1)
C4
DD
DS39635C-page 31
(1)
/AV
V
V
DD
SS
SS
pairs.
C3
(1)