ADUC7128BCPZ126 Analog Devices Inc, ADUC7128BCPZ126 Datasheet - Page 82

• Manufacturer Part Number: ADUC7128BCPZ126
• Description: IC DAS MCU ARM7 ADC/DDS 64-LFCSP
• Manufacturer: Analog Devices Inc
• Series: MicroConverter® ADuC7xxxr

Specifications of ADUC7128BCPZ126

• Core Size: 16/32-Bit
• Program Memory Size: 126KB (126K x 8)
• Core Processor: ARM7
• Speed: 41.78MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: PLA, POR, PWM, PSM, Temp Sensor, WDT
• Number Of I /o: 28
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x12b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 64-LFCSP
• Controller Family/series: (ARM7) ADUC
• No. Of I/o's: 40
• Ram Memory Size: 8KB
• Cpu Speed: 41.78MHz
• No. Of Timers: 5
• No. Of Pwm Channels: 6
• Package: 64LFCSP EP
• Device Core: ARM7TDMI
• Family Name: ADuC7xxx
• Maximum Speed: 41.78 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 16|32 Bit
• Number Of Programmable I/os: 40
• Interface Type: I2C/SPI/UART
• On-chip Adc: 14-chx12-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: EVAL-ADUC7128QSPZ - KIT DEV FOR ADUC7128
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

ADuC7128/ADuC7129
Table 117. T4CON MMR Bit Designations
Bit
31:18
17
16:12
11:9
8
7
6
5:4
3:0
Value
000
001
010
011
00
01
10
11
0000
0100
1000
1111
Description
Reserved. Set by user to 0.
Event Select Bit.
Event Select Range, 0 to 31. The events are as described in the Timers section.
Clock Select.
Core Clock (Default).
32.768 kHz Oscillator.
P4.6.
P4.7.
Count Up.
Timer4 Enable Bit.
Timer4 Mode.
Format.
Binary (Default).
Reserved.
Hours:Minutes:Seconds:Hundredths: 23 Hours to 0 Hours.
Hours:Minutes:Seconds:Hundredths: 255 Hours to 0 Hours.
Prescaler.
Source Clock/1 (Default).
Source Clock/16.
Source Clock/256.
Source Clock/32,768.
Set by user to enable time capture of an event.
Cleared by user to disable time capture of an event.
Set by user for Timer4 to count up.
Cleared by user for Timer4 to count down (default).
Set by user to enable Timer4.
Cleared by user to disable Timer4 (default).
Set by user to operate in periodic mode.
Cleared by user to operate in free-running mode (default).
Rev. 0 | Page 82 of 92