ST7FLITE20F1B6 STMicroelectronics, ST7FLITE20F1B6 Datasheet - Page 127

• Manufacturer Part Number: ST7FLITE20F1B6
• Description: IC MCU 8BIT 8K FLASH 20-DIP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE20F1B6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-DIP (0.300", 7.62mm)
• Processor Series: ST7FLITE2x
• Core: ST7
• Data Bus Width: 8 bit
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5517 - EVAL BOARD 1PHASE ENERGY METER497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Table 80. TIMERx_ICAP_Mode
Function Name
Function Prototype
Behaviour Description
Input Parameter 1
Input Parameter 2
Output Parameter
Required Preconditions
Functions called
Postconditions
See also
1) Function not available in ST72F65.
TIMERx_ICAP_Mode
Void TIMERx_ICAP_Mode(Timer_Icap ICAP_I,
Timer_Edge EDGE_SELECT_Y)
Configures the timer to Input capture mode. It determines
the type of level transition on input capture pins.This func-
tion should be called twice in order to use both ICAP1 &
ICAP2.
TIMER_ICAP_I
where I can be 1 or 2.
I = 1, Input capture 1 is selected.
I = 2, Input capture 2 is selected.
TIMER_EDGE_Y
where Y can be 0 or 1.
Y= 0, Capture occurs at falling edge.
Y= 1, Capture occurs at the rising edge.
None
1. Input Capture pin used must be configured as floating
input.
2. Only input capture 2 can be used if PWM or OPM is ac-
tive.
None
1. Timer configured for input capture mode.
2. To detect the occurrence of valid edge, you can poll the
input capture flag using the function
TIMERx_Status_Flag. This is in case you have not ena-
bled the input capture interrupt.
TIMERx_Status_Flag,TIMERx_PWM_Mode,
TIMERx_OPM_Mode, TIMERx_ICAP_Getvalue
1)
Function Descriptions
127/235