ST7FLITE20F1B6 STMicroelectronics, ST7FLITE20F1B6 Datasheet - Page 179

• Manufacturer Part Number: ST7FLITE20F1B6
• Description: IC MCU 8BIT 8K FLASH 20-DIP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE20F1B6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-DIP (0.300", 7.62mm)
• Processor Series: ST7FLITE2x
• Core: ST7
• Data Bus Width: 8 bit
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5517 - EVAL BOARD 1PHASE ENERGY METER497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Table 123. LART_ICAPMode
Note: This function is available only for ST7FLite1, ST7FLite2, ST7FLite3 and ST7DALI de-
Table 124. LART_ICAPGetValue
Note: This function is available only for ST7FLite1, ST7FLite2, ST7FLite3 and ST7DALI de-
Function Name
Function Prototype
Behaviour Description
Input Parameter
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
Function Name
Function Prototype
Behaviour Description
Input Parameter
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
vices.
vices.
LART_ICAPMode
Void LART_ICAPMode( Lart_ICAPInitParams InitPar-
ams)
Configures the input Capture mode. This function also en-
ables Input capture interrupt if LART_ICAP_IT_ENABLE
is passed as user parameter.
This function clears the input capture flag.
InitParams
LART_ICAP_DEFAULT
Input capture function is used in polled mode
LART_ICAP_IT_ENABLE
Input Capture Interrupt is enabled
None
LART_Init must have been called to select the counter
clock.
None
Poll Input Capture flag or wait for interrupt to read the Input
Capture value
LART_ICAPGetValue
LART_ICAPGetValue
Unsigned int LART_ICAPGetValue()
Reads the 12-bit Input capture register value
None
Returns the 12-bit input capture register value
LART_ICAPMode must have been called. This function
should be called only after Input Capture flag is set (flag is
checked either by polling or by enabling Input capture in-
terrupt)
None
None
LART_ICAPMode
Function Descriptions
179/235