ST7FLITE20F1B6 STMicroelectronics, ST7FLITE20F1B6 Datasheet - Page 208

• Manufacturer Part Number: ST7FLITE20F1B6
• Description: IC MCU 8BIT 8K FLASH 20-DIP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE20F1B6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-DIP (0.300", 7.62mm)
• Processor Series: ST7FLITE2x
• Core: ST7
• Data Bus Width: 8 bit
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5517 - EVAL BOARD 1PHASE ENERGY METER497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Function Descriptions
9.1.14 MCC
Note: If you want to enable interrupts, parameter MCC_IT_ENABLE has to be passed in the
Caution: The MCO function is stopped during Active-Halt mode.
208/235
Function Name
Function Prototype
Behaviour Description
Input Parameters
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
MCC_Init function. You must then use the “EnableInterrupts” macro to reset the Interrupt
mask.
MCC_Init
Void MCC_Init (MCC_Init Init_Value)
Initialization of MCC. By default, main clock out (MCO) al-
ternate function, beep mode and oscillator interrupt are
disabled. You can change the default configuration, by se-
lecting input parameters given below. You can pass one or
more parameters by ‘OR’ing them.
MCC_DEFAULT
Load MCC registers with reset value (00h).
MCO_ENABLE
Enables main clock out alternate function.
MCC_IT_ENABLE
Enables oscillator interrupt.
None
None
None
None
None