ST7FLITE20F1B6 STMicroelectronics, ST7FLITE20F1B6 Datasheet - Page 176

• Manufacturer Part Number: ST7FLITE20F1B6
• Description: IC MCU 8BIT 8K FLASH 20-DIP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE20F1B6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-DIP (0.300", 7.62mm)
• Processor Series: ST7FLITE2x
• Core: ST7
• Data Bus Width: 8 bit
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5517 - EVAL BOARD 1PHASE ENERGY METER497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Function Descriptions
Table 120. LART_ConfigureOCMP
Note: Take care of the ATR value while using this function.
176/235
Function Name
Function Prototype
Behaviour Description
Input Parameter 1
Input Parameter 2
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
1) Feature available only for ST7FLite1, ST7FLite2, ST7FLite3 and ST7DALI devices
LART_ConfigureOCMP
Void LART_ConfigureOCMP( Lart_OCMPChannel OCM-
PChannel, unsigned int Dutycycle_Data)
Puts timer in Output Compare mode. This mode disables
PWM output.
OCMPChannel
LART_OCMP0
OCMP0 is configured
LART_OCMP1
OCMP1 is configured
LART_OCMP2
OCMP2 is configured
LART_OCMP3
OCMP3 is configured
Dutycycle_Data
Data to be loaded in Duty cycle register (0x000 to 0xFFF)
which will be compared with upcounter.
None
LART_Init must have been called to select the counter
clock.
None
When the upcounter value reaches the Dutycycle_Data,
the CMPFxflag is set and an interrupt is generated if com-
pare interrupt is enabled.
LART_Init, LART_OCMP_Mode
1)
1)
1)