DF2210CUNP24V Renesas Electronics America, DF2210CUNP24V Datasheet - Page 129

• Manufacturer Part Number: DF2210CUNP24V
• Description: MCU 16BIT FLASH 3V 32K 64-QFN
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of DF2210CUNP24V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 24MHz
• Connectivity: SCI, SmartCard, USB
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 37
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 64-QFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Note: * Supported only by the H8S/2218 Group.
Bit
7
6
5
4
3
2
1
0
Bit Name
–
–
INTM1
INTM0
NMIEG
MRESE
–
RAME
Initial Value R/W
0
0
0
0
0
0
0
1
R/W
–
R/W
R/W
R/W
R/W
–
R/W
Description
Reserved
The write value should always be 0.
Reserved
This bit is always read as 0 and cannot be modified.
These bits select the control mode of the interrupt
controller. For details of the interrupt control modes,
see section 5.6, Interrupt Control Modes and Interrupt
Operation.
00: Interrupt control mode 0
01: Setting prohibited
10: Interrupt control mode 2
11: Setting prohibited
NMI Edge Select
Selects the valid edge of the NMI interrupt input.
0: An interrupt is requested at the falling edge of NMI
1: An interrupt is requested at the rising edge of NMI
Manual Reset Select
Enables or disables the MRES pin* input.
0: Manual reset is disabled
1: Manual reset is enabled
The MRES input pin* can be used.
Reserved
This bit is always read as 0 and cannot be modified.
RAM Enable
Enables or disables the on-chip RAM. The RAME bit
is initialized when the reset status is released.
0: On-chip RAM is disabled
1: On-chip RAM is enabled
input
input
Rev.7.00 Dec. 24, 2008 Page 73 of 698
REJ09B0074-0700